- +91 22 66363099
- info@spmetal.net
What is Stainless Steel Slip On Flange?
Slip on flanges are one of the simplest and popular flanges utilized in the pipping industry. These flanges can be characterized by a low-profile head whose length can be adjusted relative to its position. They can be utilized without a head if the space is less across the system. A slip on flange can be easily slid across the piping component and welded using one or two fillet welds. These flanges are widely seen in lower-pressure applications where the stress barrier is low. Their lower costs and easy installation processes are one of the many reasons these flanges are preferred by a lot of customers.
ASTM A182 F304 Slip On Flange vs ASTM A182 F316 SORF Flange
ASTM A182 F304 and F316 SORF flanges are the two common grades of flanges utilized across the piping industry. These flanges of both these grades are similar visually but can be distinguished via their chemical composition.
Differnce Between ANSI B 16.5 Class 150 Slip-On Flange and class 300 slip on flange
Class 150 and Class 300 are pressure classes in a slip on flanges. Pressure classes in a flanges can be termed as the maximum allowable pressure a flange can withstand when the temperature increases. The ANSI B 16.5 class 150 slip on flange is designed to withstand 140 psi of pressures at 600 degrees F. A class 300 slip on flange can withstand 570 psi of pressures at the same temperature. The 300 class flange is stronger and more robust than the class 150 slip on flange having the same bore size.
ASME B16.5 Slip On Flange Uses
Slip-on flanges are preferred economical flanges across the piping industry. These flanges are a flange of choice in low-pressure systems where there is little risk of spills or leaks. A slip on flange is very common in process lines for substances like steam, gas, condensers, etc. These flanges are utilized in firefighting lines, compressed low-pressure airlines, cooling water, etc.
SS Slip On Flange Features
Some of the features of stainless slip on flanges include
Table of Content
Stainless Steel Slip On Flange Specifications
| Specification | Stainless Steel Slip On Flanges |
|---|---|
| Face Type | Slip On Raised Face Flanges Slip Blind Flanges Reducing Slip On Flanges Slip On Flat Face Flanges Slip Joint Flanges Slip On Plate Flanges |
| Making Methods | Casting And Forging Rolling And Cutting |
| Size | 1/2”, 2”, 3”, 4”, 6”, 8”, 10”, 12” to 24”. |
| Customized Diameter | Up to 40 Inches |
| Slip On Flanges Use | Stainless Steel Slip On Flanges are used in applications where the two pipes have to be held together with nuts and bolts. |
| Schedule | SCH 5S, SCH 10, SCH 40, SCH 80, SCH 120, SCH 160, SCH 180 To XXS |
| Manufacturer Length | NPS 1⁄₂" To NPS 48” |
| EN Standard | 6Bar/ 10Bar/ 16Bar/ 25Bar/ 40Bar |
| DIN Standard | PN6/ PN10/ PN16/ PN25/ PN40/ PN64 |
| JIS Standard | 5K/ 10K/ 16K 20K/ 30K/ 40K/ 63K |
| Other Standard | B16.47 Series A & B/ B16.48, BS4504/ GOST |
| UNI Standard | 6 Bar/ 10 Bar/ 16 Bar/ 25 Bar/ 40 Bar |
| Supporting Material | Gasket/ Ring Joint/ Flanges Bolts |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged/ Heat treated and machined |
| Manufacturer of | Forged/ Threaded/ Screwed / Plate |
| Manufacturer Pressure Class | Class 150 (lb) up to 24" Class 300 (lb) up to 20" Class 600 (lb) up to 20" Class 900 (lb) up to 16" Class 1500 (lb) up to 10" Class 2500 (lb) up to 8" |
| Flanges Test | Hydrostatic testing machine/ UI trasonic flaw detector/ X-ray detector/ Direct-reading Spectrograph/ Magnetic particle detector |
| Flanges Equipment | Pushing Machine/ electric bevelling machine/ Press machine/ Bending machine/ Sand-blasting machine etc |
| Coating | Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized |
| Application | Bitumen upgraders Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids. |
Looking for Slip On Flange suppliers who offer prompt delivery in Asia? Manufacturer of Stainless Steel Slip On Raised Face Flange in India, call us for big discount and ready sizes, check latest price of Stainless Steel Slip On Flat Face Flanges in Mumbai
Stainless Slip On Flange Standard
Buy Stainless Steel Rf SORF Flange Directly From Largest Manufacturers In Mumbai, Check Weight Chart Of Stainless Steel Raised Face SORF Flange
Stainless Steel Slip On Flange Weight
| DN (milimeter) | NPS (Inches) | FLANGE THICKNESS D Milimeter | FLANGE OD A Milimeter | SORF FLANGE WEIGHT (KGS) |
| 80 | 3 | 23.9 | 190.5 | 3.9 |
| 90 | 3 1/ 2 | 23.9 | 215.9 | 4.8 |
| 100 | 4 | 23.9 | 228.6 | 5.3 |
| 125 | 5 | 23.9 | 254 | 6.1 |
| 150 | 6 | 25.4 | 279.4 | 7.5 |
| 15 | 1/ 2 | 11.2 | 88.9 | 0.4 |
| 20 | 3/ 4 | 12.7 | 98.6 | 0.6 |
| 25 | 1 | 14.2 | 108 | 0.8 |
| 32 | 1 1/ 4 | 15.7 | 117.3 | 1 |
| 40 | 1 1/ 2 | 17.5 | 127 | 1.3 |
| 50 | 2 | 19.1 | 152.4 | 2.1 |
| 65 | 2 1/ 2 | 22.4 | 177.8 | 3.3 |
| 200 | 8 | 28.4 | 342.9 | 12.1 |
| 250 | 10 | 30.2 | 406.4 | 16.5 |
| 300 | 12 | 31.8 | 482.6 | 26.2 |
| 350 | 14 | 35.1 | 533.4 | 34.6 |
| 400 | 16 | 36.6 | 596.9 | 44.8 |
| 450 | 18 | 39.6 | 635 | 48.9 |
| 500 | 20 | 42.9 | 698.5 | 61.9 |
| 600 | 24 | 47.8 | 812.8 | 86.9 |
SORF Flange Material
| Copper Nickel SORF Flange | ASME, ASTM SB 61, 151, 152, 62, Copper Nickel 90/10 (C70600 ), UNS C71640, Cupro Nickel 70/30 (C71500) |
|---|---|
| Brass SORF Flange | 3602, H62 H59, 2604, etc. |
| Inconel SORF Flange | ASME SB564, ASTM B564, Inconel x750, 690, 783, 625, 718, 600, 601 Flanges |
| Hastelloy SORF Flange | ASME SB564, ASTM B564, Hastelloy C22 (UNS N06022), C276 (UNS N10276), C2000, C4, B3, B2, X Flanges |
| Duplex SORF Flange | S32205, S31803 A182 Gr F54, F59, F53, F51, F57, F55, F52, F61 F60, |
| Super Duplex SORF Flange | S32760, S32750 A182 Gr F57, F55, F61 F60, F52, F54, F51, F53, F59, |
| Incoloy SORF Flange | ASME SB564, ASTM B564, Incoloy 800HT 800, 800H (UNS N08800), 925 Flanges, 825 (UNS N08825) |
| 254 Smo SORF Flange | ASME SA182, ASTM A182, UNS S31254, SMO 254/6Mo, DIN 1.4547 |
| Monel SORF Flange | ASME SB564, ASTM B564, Monel 500 (UNS No. N05500), Monel 400 (UNS No. N04400) |
| Alloy 20 SORF Flange | ASME SB462, ASTM B462, Alloy 20Cb-3 Carpenter® 20 Alloy, |
| Aluminium SORF Flange | 2017, 5052, 6063, 6061, 7075, etc. |
| Carbon Steel SORF Flange | ASME/ASTM A/SA105N A/SA105 & A/SA216-WCB, DIN 1.0460, DIN 1.0402, DIN 1.0619, ASTM A105, Die Steel, ASME SA105, ASTM A350 LF2, A105N, ASME SA350, High Yield CS ASTM A694 (F52 F80 F70 F65 F56 F60) |
| Stainless Steel SORF Flange | A/SA182 ASME/ASTM F316L F304, F304L, F316,, ASME/ASTM A/SA351 CF8, CF3M, CF8M, CF3, DIN 1.4301,DIN 1.4401, DIN 1.4306, DIN 1.4404, DIN 1.4408, DIN 1.4409, DIN 1.4308, DIN 1.4306 |
| Alloy Steel SORF Flange | ASME SA182/ ASTM A182 F11, F91 F22, F5, F9, F12, |
| Ti SORF Flange | ASME SB381, ASTM B381, Ti Grade 1, Ti Grade 4, Ti Grade 2, Ti Grade 5, ASTM R50250/Grade 1 Ti Grade 7 | R50400/Grade 2 | R50700/Grade 4 | R50550/Grade 3 | Grade 6 |R52400/Grade 7 | R56320/Grade 9 | R53400/Grade 12 | R56400/Grade 5 |
| Copper SORF Flange | C17200, C10700, C10500, C12000,C12200, C33200, TP2, C60800, T2, C11600, TU1, C11300, C68700, C12500, C71520, C11000, C23000, C63020, C44500, C71500, C11400, C10300, C14200, C26000, C14420, C14510, C14520, TP1, T1, C37000, C27400, C70400, C44400, C10200, C70600, C11500, C14500, C28000, C10930, C71000, C27000, C21000, C10800, C12300, TU2, C10400, C10910,C10920, C44300, C14530, C10100, C70620, C71640, C19200, C33000, etc |
| Nickel SORF Flange | ASME SB564, ASTM B564, Nickel 200, Nickel 205, Nickel 201, Nickel 205LC |
| Nimonic SORF Flange | Nimonic 80A, Nimonic 75, Nimonic 90 |
| Other SORF Flange material | Alumunum bronze, Tin bronze, Lead bronze |
PED Certified Slip On Flange manufacturers in India, Dimensions Of Stainless Steel Flat Face Slip On Flange In MM.
ASTM A182 SORF Flange Types
Test Certificate Of SS 304 SORF Flange
Pn16 SORF Flange Weight
| NPS | Weight In Kilogram |
| DN | KG |
| 10 | 0.60 |
| 15 | 0.67 |
| 20 | 0.94 |
| 25 | 1.11 |
| 32 | 1.62 |
| 40 | 1.85 |
| 50 | 2.46 |
| 65 | 2.99 |
| 80 | 3.61 |
| 100 | 3.99 |
| 125 | 5.41 |
| 150 | 6.55 |
| 175 | 8.42 |
| 200 | 8.97 |
| 250 | 12.76 |
| 300 | 16.60 |
| 350 | 24.08 |
| 400 | 30.20 |
| 450 | 41.67 |
| 500 | 52.87 |
| 600 | 77.58 |
| 700 | 77.13 |
| 800 | 106.35 |
| 900 | 125.39 |
| 1000 | 177.99 |
Stainless Steel Slip On Flat Face Flange Services
Ms Slipon Flange Weight Chart
Stainless Steel Slip On Flange Price List
| Description | Per Unit (INR) |
|---|---|
| SIZE=1.500 SORF FLANGE 150 A105N RF (FLANGES | 665 |
| FLANGES, SLIP ON, 12INCH, CL 150, RAISED FACE. | 892 |
| 40 NUM FLANGES, SLIP-ON 6 IN RAISED FACE ANSI 150 LB 8-HOLE CARBON STEEL BLASTED AND COATED | 401 |
| FLANGES DIN SLIP-ON FLAT FACE 4 MS | 2,474 |
| STAINLESS STEEL FLANGES SA/A182 GRADE F304/304L ANSI B16.5 FLANGE.SLIP ON RAISED FACE,300#DN25 | 320 |
| STAINLESS STEEL FLANGES SA/A182 GRADE F304/304L ANSI B16.5 FLANGE.SLIP ON RAISED FACE,150#DN25 | 312 |
| STAINLESS STEEL FLANGES SA/A182 GRADE F304/304L ANSI B16.5 FLANGE.SLIP ON RAISED FACE,150#DN50 | 318 |
| STAINLESS STEEL FLANGES SA/A182 GRADE F304/304L ANSI B16.5 FLANGE.SLIP ON RAISED FACE,300#DN100 | 294 |
| STAINLESS STEEL FLANGES SA/A182 GRADE F304/304L ANSI B16.5 FLANGE.SLIP ON RAISED FACE,150#DN200 | 294 |
| STAINLESS STEEL FLANGES SA/A182 GRADE F304/304L ANSI B16.5 FLANGE.SLIP ON RAISED FACE,300#DN50 | 318 |
Reducing Slip On Flange Torque Chart
| Size in Inches | Size in Millimeter | Imperfections Max. Radial Projection | |
|---|---|---|---|
| No Deeper Than the Bottom of the Serrations, millimeter | Deeper Than the Bottom of the Serrations, millimeter | ||
| 1/2 | 15 | 3.0 | 1.5 |
| 3/4 | 20 | 3.0 | 1.5 |
| 1 | 25 | 3.0 | 1.5 |
| 1 1/4 | 32 | 3.0 | 1.5 |
| 1 1/2 | 40 | 3.0 | 1.5 |
| 2 | 50 | 3.0 | 1.5 |
| 2 1/2 | 65 | 3.0 | 1.5 |
| 3 | 80 | 4.5 | 1.5 |
| 3 1/2 | 90 | 6.0 | 3.0 |
| 4 | 100 | 6.0 | 3.0 |
| 5 | 125 | 6.0 | 3.0 |
| 6 | 150 | 6.0 | 3.0 |
| 8 | 200 | 8.0 | 4.5 |
| 10 | 250 | 8.0 | 4.5 |
| 12 | 300 | 8.0 | 4.5 |
| 14 | 350 | 8.0 | 4.5 |
| 16 | 400 | 10.0 | 4.5 |
| 18 | 450 | 12.0 | 6.0 |
| 20 | 500 | 12.0 | 6.0 |
| 24 | 600 | 12.0 | 6.0 |
Documentation Of 316 SS Slip On Flange
Slip On Flat Face Flange Types
A105 Slip On Flange Symbol
How To Install Slip On Flange
SS SORF Flange Hsn Code
| HS Code | Description |
|---|---|
| 7307 | Stainless Steel Slip On Flange |
Rf Slip On Flange Finish
| Normal Pipe Size | (A) | (B) |
|---|---|---|
| 1/2 | 3.0 | 1.5 |
| 3/4 | 3.0 | 1.5 |
| 1 | 3.0 | 1.5 |
| 1-1/4 | 3.0 | 1.5 |
| 1-1/2 | 3.0 | 1.5 |
| 2 | 3.0 | 1.5 |
| 2-1/2 | 3.0 | 1.5 |
| 3 | 4.5 | 1.5 |
| 3-1/2 | 6.0 | 3.0 |
| 4 | 6.0 | 3.0 |
| 5 | 6.0 | 3.0 |
| 6 | 6.0 | 3.0 |
| 8 | 8.0 | 4.5 |
| 10 | 8.0 | 4.5 |
| 12 | 8.0 | 4.5 |
| 14 | 8.0 | 4.5 |
| 16 | 10.0 | 4.5 |
| 18 | 12.0 | 6.0 |
| 20 | 12.0 | 6.0 |
| 22 | 12.0 | 6.0 |
| 24 | 12.0 | 6.0 |
Stock Of Stainless Steel SORF Flange
| ANSI/AMSE B16.5, Inches, SCHEDULE 40, Stainless Steel Slip On Raised Face Flanges |
| 10 Inches, SCHEDULE 40, Class 150, Stainless Steel Reducing SORF Flanges |
| DN450, SCHEDULE 160,Stainless Steel SORF Flat Face Flanges |
| 1/2 to 56 Inches, ASME B16.5, Sch 120 Stainless Steel SORF Plate Flanges |
| SCHEDULE 100, 12 Inches, Stainless Steel SORF Welding Neck Flanges |
| 2 Inches X 1 Inches Size, SCHEDULE 80/ 160, Stainless Steel Sorf Plate Flanges |
| SCHEDULE 10S, 5 Inches, Buttweld ANSI B16.5, Stainless Steel SORF Table E Flanges |
| ASME B16.5, DN80, SCHEDULE 10S, Stainless Steel Threaded SORF Flanges |
| 1/2 Inches to 56 inch, SCHEDULE5 to SCHEDULE160, Stainless SteelPn16 SORF Flanges |
| 14 Inches, WT 0.375 In, ASTM A182, Stainless Steel Class 150 SORF Flanges |
| 6 inch, SCHEDULE 10S, ASME B16.5, Stainless SORF Flanges |
| 1/2 Inches, SCHEDULE 80S, RF, Bs4504 Stainless Steel Pn16 SORF Flanges |
| 6 × 3 Inches, SCHEDULE 120, ASME B16.5 SS SORF Flanges |
SS Slip On Flange Grades
Check Equivalent Of Stainless Steel SORF Flanges and Stainless Steel Reducing Slip On Flanges Supplier & Manufacturers In Mumbai, India.
Equivalent Of Slip On Integral Flange
| STANDARD | GOST | WERKSTOFF NR. | JIS | UNS | BS | EN | AFNOR |
|---|---|---|---|---|---|---|---|
| SS 310 | 20Ch25N20S2 | 1.4841 | SUS 310 | S31000 | 310S24 | X15CrNi25-20 | – |
| SS 310S | 20Ch23N18 | 1.4845 | SUS 310S | S31008 | 310S16 | X8CrNi25-21 | – |
| SS 316 | – | 1.4401 / 1.4436 | SUS 316 | S31600 | 316S31 / 316S33 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | Z7CND17‐11‐02 |
| SS 316L | 03Ch17N14M3 / 03Ch17N14M2 | 1.4404 / 1.4435 | SUS 316L | S31603 | 316S11 / 316S13 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | Z3CND17‐11‐02 / Z3CND18‐14‐03 |
| SS 304 | 08Х18Н10 | 1.4301 | SUS 304 | S30400 | 304S31 | X5CrNi18-10 | Z7CN18‐09 |
| SS 304L | 03Х18Н11 | 1.4306 / 1.4307 | SUS 304L | S30403 | 3304S11 | X2CrNi18-9 / X2CrNi19-11 | Z3CN18‐10 |
| SS 304H | – | 1.4301 | – | S30409 | – | – | – |
| SS 316Ti | 08Ch17N13M2T | 1.4571 | SUS 316Ti | S31635 | 320S31 | X6CrNiMoTi17-12-2 | Z6CNDT17‐123 |
| SS 317 | – | 1.4449 | SUS 317 | S31700 | – | – | – |
| SS 317L | – | 1.4438 | SUS 317L | S31703 | – | X2CrNiMo18-15-4 | – |
| SS 446 | – | 1.4762 | – | S44600 | – | – | – |
| SS 321 | – | 1.4541 | SUS 321 | S32100 | – | X6CrNiTi18-10 | – |
| SS 321H | – | 1.4878 | SUS 321H | S32109 | – | X12CrNiTi18-9 | – |
| SS 347 | 08Ch18N12B | 1.4550 | SUS 347 | S34700 | – | X6CrNiNb18-10 | – |
| SS 410 | – | 1.4006 | SUS 410 | S41000 | 410S21 | X12Cr13 | – |
| SS 904L | STS 317J5 | 1.4539 | SUS 904L | N08904 | 904S13 | X1NiCrMoCu25-20-5 | Z2 NCDU 25-20 |
Slip On Pipe Flange Marking
Get instant delivery Of Stainless Steel Slip On Integral Flanges , Mechanical Properties Of Stainless Steel Slip On Pipe Flange, Stainless Steel Slip On Reducing Flange Manufacturer In Mumbai. India.
Mechanical Properties Of Slip On Reducing Flange
| Type | UNS | Tensile (ksi) minimum | Yield (ksi) minimum | Elongation minimum | Hardness (Brinell) maximum | Hardness (Rockwell B) max |
|---|---|---|---|---|---|---|
| 302 | S30200 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 304 | S30400 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 304L | S30403 | 70 | 30 | 40% in 2″ | 183 | 88 |
| 309 | S30900 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 309S | S30908 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 310 | S31000 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 310S | S31008 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 316 | S31600 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 316L | S31603 | 70 | 25 | 35% in 2″ | 217 | 95 |
| 317 | S31700 | 75 | 30 | 35% in 2″ | 217 | 95 |
| 317L | S31703 | 75 | 30 | 35% in 2″ | 217 | 95 |
| 321 | S32100 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 347 | S34700 | 75 | 30 | 40% in 2″ | 183 | 88 |
Other Materials Of Slip On Flange
Chemical Composition Of Hubbed Slip On Flange
| Type | C | Mn | P | S | Si | Cr | Ni | Mb |
|---|---|---|---|---|---|---|---|---|
| 302 | 0.15 | 2.00 | 0.045 | 0.030 | 1.00 | 17.00/19.00 | 8.00/10.00 | – |
| 304 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/10.50 | – |
| 304L | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/12.00 | – |
| 309 | 0.20 | 2.00 | 0.045 | 0.030 | 1.00 | 22.00/24.00 | 12.00/15.00 | – |
| 309S | 0.08 | 2.00 | 0.045 | – | 1.00 | 22.00/24.00 | – | – |
| 310 | 0.25 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
| 310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
| 316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
| 316L | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
| 317 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00/1.00 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
| 317L | 0.03 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
| 321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 17.00/19.00 | 9.00/12.00 | 0.75/0.75 |
| 347 | 0.08 | 2.00 | 0.040 | 0.030 | 0.5/1.00 | 17.00/19.00 | 9.00/12.00 | 0.5/0.75 |
Know Which Material Supplied Where:
Stainless Steel Slip On Flange
ASTM A182 Slip On Flange
Slip On Raised Face Flange
ASME SA182 Slip On Flat Face Flange
Threaded Slip On Flange
Stainless Steel Rf Slip On Flange
Raised Face Slip On Flange
SS Flat Face Slip On Flange