• +91 22 66363099
  • info@spmetal.net

Stainless Steel 304 Sheet


Stainless Steel 304 Plate

304 Stainless Steel Sheet Properties

Corrosion Resistance

It provides excellent corrosion resistance in a range of atmospheric environments and also when it comes in contact with many corrosive substances. Crevice corrosion and pitting can arise in surrounding containing chlorides and stress corrosion cracking may arise at a temperature above 60°C.


Heat resistance

It is resistant to potable water containing up to approximately 200mg/L chlorides at room temperature 20°C to 25°C, this reduces to about 150mg/L at around 60°C.
It provides good oxidization resistance in intermittent service at about 870°C and continuous service to 925°C. It is not recommended to be used in the temperature range of 425-860°C if subsequent aqueous corrosion resistance is required.


Machinability

304 grade steel provides good machinability and it can also be enhanced by the following techniques
1. Cutting borders must be keen. Dull borders may cause too much work hardening
2. Cuts must be light but deep sufficient to stop work hardening by riding on the material surface
3. Chip breaker should be working to aid in ensuring swarf endure clear of the work
4. Low thermal conductivity of it outcomes in heat concentrating at the cutting borders. Which conveys that coolants and lubricants are mandatory and must be utilized in larger amount.


Welding Properties

It provides excellent welding with and without filler metals by using standard fusion methods. Post-weld annealing is not needed to weld thin sections however heavy welded sections may be needed for some post-weld annealing for optimal corrosion resistance. For optimal annealing heat to 1010-1120°C and cool rapidly with air or water. It cannot be hardened by thermal treatment.

What is stainless steel 304 hr coil

Stainless steel 304 hr coil is a flexible stainless steel coil, which is extensively utilized for the production of equipment and elements which needs general properties like ductility and corrosion resistance.

It can be generally used at a temperature less than 650 ℃. It provides excellent corrosion resistance of stainless steel and good intergranular corrosion resistance. For oxidizing acids, it is established in experiments that nitric acid is present at a boiling temperature of 65% or lesser.

In alkali solution and most of the organic acid and inorganic acid provides good corrosion resistance.

It is the most widely used stainless steel HR coil, it is suitable for food processing, storage and transportation, water heaters, boilers, auto parts, medical equipment, chemical, agriculture, marine components, building materials etc. It is nationally recognized as food grade stainless steel.


ASTM A240 Type 304 Plate Supplier in India

Stainless Steel 304 Coil

Stainless Steel 304 Coil

ASTM A240 Grade 304

ASTM A240 Grade 304

304 Stainless Steel Sheet Specifications

SpecificationsASTM A240 / ASME SA240
Thickness4mm-100mm
Width
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length of 304 Stainless Sheet2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface2D, 2B, BA, NO.4, NO.1, NO.8, 8K, checkered, mirror, embossed, sand
blast, hair line, Brush, etching, etc
SA240 Gr304 Plate FinishesHot rolled plate (HR), Cold rolled sheet (CR), 2B, BA NO(8), 2D, SATIN
Form of Stainless Sheet 304Foils, Coils, Rolls, Shim Sheet, Plain Sheet, Perforated Sheet, Strip, Chequered Plate, Flats, Ring (Flange), Blank (Circle), etc.
Stainless Steel 304 Plate Suppliers In India

Supplier And Stockist Of schedule 40 SS UNS S30400 Cold Rolled/ Hot Rolled Plates And ASTM A240 Type 304 Sheet In Different Length Or Cut To Size At Distributor Price

304 Stainless Steel Plate Price

DescriptionPrice In (US)Price in (INR)
SS 304 mirror Stainless Steel Strip/ Coil/ Sheet$1,200.00-$1,800.00/ Metric Ton90115.80 - 135173.70
SS 304 1mm Sheet Price$1,400.00-$1,600.00/ Ton105135.10 - 120154.40
Standard size 4x8 metal sus 304 grade SS 304 Chequered Plate Price$1.48-$1.98/ Kilogram111.14 - 148.69
Stainless Steel Sheet 304 / SS 304 Perforated Sheet Price $1.70-$2.20/ Kilogram127.66 - 165.21
SS 304 2mm Sheet Price$1.48 - $2.20111.14 - 165.21

Looking for Stainless Steel 304 Plate supplier who offer prompt delivery in Asia? 304 Stainless Steel Sheet Manufacturers In India, call us for big discount and ready sizes, check latest SS 304 Plate Price in Mumbai

Stainless Steel 304 Sheet Density

TypeDensity
SS 304 Plate8.0 g/cm3

304 Stainless Steel Melting Point

GradeElastic Modulus (GPa)Density (kg/m3)Thermal Conductivity (W/m.K)Electrical Resistivity (nΩ.m)Mean Coefficient of Thermal Expansion (μm/m/°C)Specific Heat 0-100°C (J/kg.K)
at 100°Cat 500°C0-100°C0-315°C0-538°C
Stainless Steel 304193800016.221.572017.217.818.4500

Stainless Steel 304 Coil Manufacturer Usa, Suppliers Of Stainless Steel 304 Perforated Sheet In Mumbai, One Stop Shop For All ASME SA240 304 2b Stainless Steel Sheet.

304 Stainless Plate Sizes

ss 304 plate size chartstandard 304 ss plate thicknessWeight per Sheetss 304 sheet weight per square meter
36 x 1200.0235 inches 0.5969 mm30.24 lbs13.69872 kg1.008 lbs/ft²4.921056 kg/m²
36 x 1440.0235 inches 0.5969 mm36.29 lbs16.43937 kg1.008 lbs/ft²4.921056 kg/m²
48 x 960.0235 inches 0.5969 mm32.26 lbs14.61378 kg1.008 lbs/ft²4.921056 kg/m²
48 x 1200.0235 inches 0.5969 mm40.32 lbs18.26496 kg1.008 lbs/ft²4.921056 kg/m²
48 x 1440.0235 inches 0.5969 mm48.39 lbs21.92067 kg1.008 lbs/ft²4.921056 kg/m²
30 x 960.0291 inches 0.73914 mm25.20 lbs11.4156 kg1.260 lbs/ft²6.15132 kg/m²
30 x 1200.0291 inches 0.73914 mm31.50 lbs14.2695 kg1.260 lbs/ft²6.15132 kg/m²
36 x 960.0291 inches 0.73914 mm30.24 lbs13.69872 kg1.260 lbs/ft²6.15132 kg/m²
36 x 960.015 inches 0.381 mm15.12 lbs6.84936 kg0.630 lbs/ft²3.07566 kg/m²
36 x 1200.015 inches 0.381 mm18.90 lbs8.5617 kg0.630 lbs/ft²3.07566 kg/m²
36 x 960.0178 inches 0.45212 mm18.15 lbs8.22195 kg0.756 lbs/ft²3.690792 kg/m²
48 x 1200.0291 inches 0.73914 mm50.41 lbs22.83573 kg1.260 lbs/ft²6.15132 kg/m²
48 x 1440.0291 inches 0.73914 mm60.49 lbs27.40197 kg1.260 lbs/ft²6.15132 kg/m²
30 x 960.0355 inches 0.9017 mm30.24 lbs13.69872 kg1.512 lbs/ft²7.381584 kg/m²
30 x 1200.0355 inches 0.9017 mm37.80 lbs17.1234 kg1.512 lbs/ft²7.381584 kg/m²
36 x 960.0355 inches 0.9017 mm36.29 lbs16.43937 kg1.512 lbs/ft²7.381584 kg/m²
36 x 1200.0178 inches 0.45212 mm22.68 lbs10.27404 kg0.756 lbs/ft²3.690792 kg/m²
48 x 960.0178 inches 0.45212 mm24.19 lbs10.95807 kg0.756 lbs/ft²3.690792 kg/m²
48 x 1200.0178 inches 0.45212 mm30.24 lbs13.69872 kg0.756 lbs/ft²3.690792 kg/m²
30 x 960.0235 inches 0.5969 mm20.16 lbs9.13248 kg1.008 lbs/ft²4.921056 kg/m²
30 x 1200.0235 inches 0.5969 mm25.20 lbs11.4156 kg1.008 lbs/ft²4.921056 kg/m²
36 x 960.0235 inches 0.5969 mm24.19 lbs10.95807 kg1.008 lbs/ft²4.921056 kg/m²
36 x 1200.0291 inches 0.73914 mm37.80 lbs17.1234 kg1.260 lbs/ft²6.15132 kg/m²
36 x 1440.0291 inches 0.73914 mm45.37 lbs20.55261 kg1.260 lbs/ft²6.15132 kg/m²
48 x 960.0291 inches 0.73914 mm40.32 lbs18.26496 kg1.260 lbs/ft²6.15132 kg/m²

UNS S30400 Plain Sheet Sizes

PRODUCTFINISHTHICKNESS MMMAXIMUM SHEET SIZE MILIMETER
Grade 304Plain 2B0.92000 x 1000
Bright0.92000 x 1000
Brushed Finish0.9, 1.22000 x 1000, 2500 x 1250
Rimex Super Mirror0.8, 1.22400 x 1200, 2500 x 1250
Embossed0.8, 1.02500 x 1250

SS 304 Perforated Sheet Supplier In India, Stainless Steel 304 Mesh Sheet Mechanical Properties, SS 304 Sheet Dealers In Mumbai

Stainless Steel 304 Strips Properties

GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardness
Rockwell B (HR B) maxBrinell (HB) max

304

515

205

40

92

201

304H

515

205

40

92

201

304H also has a requirement for a grain size of ASTM No 7 or coarser.

304 Stainless Steel Plate Chemical Composition

GradeCMnSiPSCrMoNiN
304min. max.

-

0.08

-

2.0

-

0.75

-

0.045

-

0.030

18.0

20.0

-

8.0

10.5

-

0.10

304Hmin. max.

0.04

0.10

-

2.0

-

0.75

-0.045

-

0.030

18.0

20.0

-

8.0

10.5

Stainless Steel 304 Strips Properties

GradeElastic Modulus (GPa)Density (kilogram/m3)Mean Coefficient of Thermal Expansion (μm/m/°C)Specific Heat 0-100°C (J/kg.K)Thermal Conductivity (W/m.K)Electrical Resistivity (nΩ.m)
0-100°C0-315°C0-538°Cat 100°Cat 500°C

SS 304/L/H

193

8000

17.2

17.8

18.4

500

16.2

21.5

720

We Have A Huge Stock Of Hot Rolled SS 304 Sheet And ASME SA240 Stainless Steel 304 Checker Plate In Specific Dimensions, Contact SP Metals Now

SS 304 Sheet Dimensions

Plate Surface finishThickness (milimeter)Width (max milimeter)
2B – heat treated, Cold rolled, pickled, skin passed Sheet0.25–8.02032
2E – heat treated, Cold rolled, mechanically descaled plate0.4–8.02032
2H – Work hardened plate0.4–6.351524
2D – heat treated, Cold rolled, pickled Sheet0.4–6.351524
2R – bright annealed plate, Cold rolled0.25–3.51524
brushed, Polished plate0.5–4.01524

ASTM A240 SS 304 Plate Imperial Dimensions

Plate Surface finishWidth (max in)Gauge (in)
2D – heat treated, Cold rolled, pickled plate6012–24
2B – heat treated, Cold rolled, skin passed Plate, pickled72*10–24
Temper rolled Sheet Mexinox only4813–29
BA Mexinox only4818–28
Polished Sheet (not brushed)6011–24

SS 304 Sheet Suppliers In Mumbai, India, Get Free Quote For 304 SS Foil, Equivalent Grades Of Stainless Steel 304 Checker Plate.

ASTM A240 Gr 304 Equivalent

radeUNS NoOld BritishEuronormSwedish SSJapanese JIS
BSEnNoName

304

S30400

304S31

58E

1.4301

X5CrNi18-10

2332

SUS 304

304H

S30409

304S51

-

1.4948

X6CrNi18-11

-

-

We provide Multiple Payment Options Of Stainless Steel 304 Checker Plate Thickness, Contact US Today For Buy UNS S30400 SS 304 Foil, SS 304 Sheet Manufacturer India.

SS 304 Plate Types

Stainless Steel 304 Strips
Stainless Steel 304 Strips
Stainless Steel Sheet 304
Stainless Steel Sheet 304
ASTM A240 Grade 304 2b Stainless Steel Sheet
ASTM A240 Grade 304 2b Stainless Steel Sheet
Stainless Steel 304 Plate
Stainless Steel 304 Plate
Cold Rolled 5mm Thickness Sus 304 2b Stainless Steel Sheet And Plate
Cold Rolled 5mm Thickness Sus 304 2b Stainless Steel Sheet And Plate
SS 304 Sheet
SS 304 Sheet
SS 304 Plate
SS 304 Plate
Perforated Plate SS 304
Perforated Plate SS 304
SS 304 Chequered Plate
SS 304 Chequered Plate
Stainless Steel 304 Shim Sheet
Stainless Steel 304 Shim Sheet
Stainless Steel 304 Sheet
Stainless Steel 304 Sheet
Astm Grade 304 SS Coils /plate Cold/cold Rolled Stainless Steel
Astm Grade 304 SS Coils /plate Cold/cold Rolled Stainless Steel

304 Stainless Steel Sheet Suppliers In India, We Maintain SS Werkstoff No 1.4301 Shim Sheet and 304 Polished Stainless Steel Plates Good Quality, Check Availability Of Schedule 40 SS UNS S30400 Cold Rolled Plates.

Difference Between Stainless Steel 304 Sheet, Plate And Foil

Stainless Steel 304 Sheet, Plate and Foil
  • If thickness greater than 6.35 mm is called a SA 240 type 304 Plate.
  • If thickness greater than 0.15 mm and less than 6.35mm is called a ASTM A240 Grade 304 Sheet.
  • If thickness less than 0.15mm is then its a ASTM A240 Type 304 Foil.

Stainless Steel 304 Shim Sheet Standard Size

  • Cold Rolled ASTM A240 304 Plate : 0.5-6.4 mm
  • Hot Rolled UNS S30400 Plate : 3.0–10.0 mm
  • ASME SA240 304 Sheet : 0.01~200mm

SP Metals are suppliers of a range of polished stainless steel 304 sheets and Plates, finishes include Bright, Natural, Brushed, Mirror, Dull Polished and Embossed Rigidised

304 Stainless Steel Sheet Finishes

  • BA Finish SS Sheet: processed with bright heat treatment after cold rolling, Bright annealed finish
  • 2B Finish SS Sheet: pickled and Cold rolled annealed and skin passed
  • Matte Finish SS Sheet: Cold rolled annealed and polished and pickled with 150 to 180 grit
  • Mirror Finish SS Sheet: Cold rolled annealed and polished and pickled to mirror finish.
Know In Detail About Exact 304 Stainless Steel Strip Thickness Of 1 inch SS Werkstoff No 1.4301 Shim Sheet With Best Price Ex Mumbai

Stainless Steel 304 Plate Thickness

Stainless SteelSpecified ThicknessTolerance
11 Gauge0.120" | 3.05 mm± 0.005" | 0.13mm
12 Gauge0.105” | 2.667mm± 0.005" | 0.127mm
14 Gauge0.075” | 1.905mm± 0.004" | 0.102mm
16 Gauge0.059” | 1.499mm± 0.004" | 0.102mm
18 Gauge0.048” | 1.219mm± 0.003" | 0.076mm
20 Gauge0.035” | 0.889mm± 0.002" | 0.051mm
22 Gauge0.031" | 0.79 mm± 0.002" | 0.05mm
24 Gauge0.025" | 0.64 mm± 0.002" | 0.05mm

AISI 304 Characteristics

SS 304 Plate Characteristics

304 SS Perforated Sheets Circle Cutting

  • Bundles (hexagonal)
  • Wooden Boxes
  • Crates (steel/wooden)
  • Special crates for U-Bend tubes with each radius separated
  • Packaging for SS 304 Stainless Steel Plate ASTM A240 as per customer's requirements
SS 304 Plate Packaging

304 SS Perforated Sheets Circle Cutting

Hole Centres milimeterHole Dia milimeterO/ATck milimeterFinishFull Sheet Size milimeter
1.50.7523%0.62B2000 x 1000
2123%1.02B2000 x 1000
2.61.530%1.02B2000 x 1000
3.5230%1.02B2000 x 1000
3.5230%1.02B2000 x 1000
5333%1.02B2000 x 1000
5.6446%1.02B2000 x 1000
8535%1.02B2000 x 1000
8651%1.02B2000 x 1000
10858%1,02B2000 x 1000
PRODUCTTHICKNESS MILIMETERFINISHMAX SHEET SIZE MILIMETER
Grade 3040.9Plain 2B2000 x 1000
0.9Bright2000 x 1000
0.9, 1.2Brushed Finish2000 x 1000, 2500 x 1250
0.8, 1.2Rimex Super Mirror2400 x 1200, 2500 x 1250
0.8, 1.0Embossed2500 x 1250

ASTM A240 Grade 304 Hardness

ASTM A240 Grade 304 Hardness

Perforated Plate SS 304 Features

  • Corrosion resistance
  • Ease of fabrication
  • Long life
  • Sustainability
  • Heat resistance
  • Flawless finish

Stainless Steel 304 Strip Manufacturer, ASTM A240 Type 304 SS Plate In India

304 Stainless Steel Sheet Welding

2 Plasma Cutting TablesSs 304 2B Plate can be plasma cut from 3/16 Inch thick thru 6.25Inch thick.
4 Kasto Plate SawsSS 304 Polished Plate or bar from 1/2Inch thick thru 22Inch thick SS 304 can be Kasto saw cut.
4 Dynamic Waterjet TablesASME Sa240 SS 304 Shim Sheet can be waterjet cut from light gauge sheet metal thru 8Inch thick Stainless 304 Plate.
Stainless 304 Plate LevelingIn house plate leveling of coil from 13 gauge stainless sheet thru 3/8Inch Stainless 304 Plate coil, thru 78.75Inch wide (2 meter)
1 plate laser304 Stainless Hot Rolled Plate gauges thru 1-1/8Inch thick SS 304 plate can be laser cut.
Gauer ProcessingSS 304 sheared and edged bar can be gauer processed from 3/16Inch thick thru 5/8Inch thick up to 8Inch wide.
3 Plate Shears304 SS Sheets thru 3/4Inch thick can be shear cut to size.
Machine CuttingSS 304 rings and discs can be machine cut from 1/2Inch thick thru 12Inch thick, up to 42Inch in diameter

SP Metals is supplier & exporter of 304 Stainless Steel Strip. Ss Sheet 304 Price, compare price of ASTM A240 Type 304 Sheet Distributors & Stainless Steel 304 hot rolled plate with SS UNS S30400 Perforated Plate Suppliers in china.

Standard 304 SS Sheet Thickness

ThicknessThicknessSize RangeSurface Area per Unit weightApprox Weight per Sheet
inchesmm lbs/ft²kg/m²lbskg
0.0150.38136 x 960.6303.0756615.126.84936
0.0150.38136 x 1200.6303.0756618.908.5617
0.01780.4521236 x 960.7563.69079218.158.22195
0.01780.4521236 x 1200.7563.69079222.6810.27404
0.01780.4521248 x 960.7563.69079224.1910.95807
0.01780.4521248 x 1200.7563.69079230.2413.69872
0.02350.596930 x 961.0084.92105620.169.13248
0.02350.596930 x 1201.0084.92105625.2011.4156
0.02350.596936 x 961.0084.92105624.1910.95807
0.02350.596936 x 1201.0084.92105630.2413.69872
0.02350.596936 x 1441.0084.92105636.2916.43937
0.02350.596948 x 961.0084.92105632.2614.61378
0.02350.596948 x 1201.0084.92105640.3218.26496
0.02350.596948 x 1441.0084.92105648.3921.92067
0.02910.7391430 x 961.2606.1513225.2011.4156
0.02910.7391430 x 1201.2606.1513231.5014.2695
0.02910.7391436 x 961.2606.1513230.2413.69872
0.02910.7391436 x 1201.2606.1513237.8017.1234
0.02910.7391436 x 1441.2606.1513245.3720.55261
0.02910.7391448 x 961.2606.1513240.3218.26496
0.02910.7391448 x 1201.2606.1513250.4122.83573
0.02910.7391448 x 1441.2606.1513260.4927.40197
0.03550.901730 x 961.5127.38158430.2413.69872
0.03550.901730 x 1201.5127.38158437.8017.1234
0.03550.901736 x 961.5127.38158436.2916.43937

Well-known SS 304 Plate Manufacturers India. For final 304 Stainless Steel Sheet Price List Please Call on +91 22 6636 3099.

SS 304 Plate Hsn Code

HSN CodeProduct Description
7219Flat-rolled products of stainless steel, of a width of 600 mm or more
721933Of a thickness exceeding 1 mm but less than 3 mm:
72193390Other
721990Other:
72199090Other
72199013Thickness less than 3 mm

How To Calculate SS 304 Sheet Weight

Length (mtrs) X Width (mtrs) X Thick (mm) X 8.068 = Wt. Per PC.
Length (feet) X Width (feet) X Thick (mm) X 3/4 = Wt. Per PC

Are You Searching Your Specific Size And Length In 304 SS Foils? Check Our Stainless Steel 304 Checker Plate Stock With Price List

Stainless Steel 304 Plate For Sale

  • 18 Gauge 304 Stainless Steel Plate
  • 20 Gauge 304 Stainless Steel Plate
  • SS Sheet 304
  • 16 Gauge 304 Stainless Steel Sheet
  • 14 Gauge 304 Stainless Steel Plate
  • 16 Gauge 304 Stainless Steel Plate
  • 18 Gauge 304 Stainless Steel Plate
  • SA 240 Gr 304 16 Gauge Stainless Steel Plate
  • 304 Stainless Steel 16 Gauge Plate
  • Stainless Steel Gauge 304 Plate
  • 304 Stainless Steel 18 Gauge Plate
  • 304 2B Stainless Plate
  • 12 Gauge 304 Stainless Steel Plate
  • 18 Gauge 304 Stainless Steel Sheet
  • A240 Type 304 SS Gauge Sheet
  • SS 304 Sheet
  • ASTM A240 Gr 304 2B Stainless Steel Sheet
  • SS 304 2B Finish Plate
  • SS 304 3mm Sheet
  • SS 304 2B Sheet
  • SS 304 Mirror Finish Sheet
  • SS 304 2B Finish Sheet
  • ASTM A240 Type 304 Stainless Steel Sheet Metal
  • 304 Stainless Steel Perforated Sheet
  • Stainless Steel 304 Hairline Finish
  • SS 304 Chequered Plate
  • Stainless Steel 304 Shim Sheet
  • SS SA240 Tp304 Hairline Finish
  • SS Sheet 2B Finish
  • 2mm 304 Stainless Steel Sheet
  • SS A240 Gr 304 Sheet Mirror Finish
  • ASTM A240 304 Stainless Steel 2B Finish
  • A240 Tp304 Stainless Plate
  • 304 2B Stainless Steel Sheet
  • SS 304 Sheet
  • ASME SA240 Stainless Steel 304 Rolling Sheet
  • ASTM A240 Stainless Steel 304 Perforated Plate
  • 8 Mirror Finish Stainless Steel 304 Diamond Plate
  • Stainless Steel 304 Hot Rolled Bbq Plate
  • ASTM A240 Tp 304 Stainless Steel Laser Cut Sheet
  • Stainless Steel 304 Tread Plate
  • Stainless Steel 304 Tisco Plate
  • SS 304 Chequered Sheet
  • Cut To Size Stainless Steel 304 Cold Rolled Plate
  • No. 4 Finish Stainless Steel 304 Hot Rolled Plate
  • No. 4 Brushed Finish Stainless Steel 304 Perforated Sheet
  • Stainless Steel 304 Hot Rolled Quarto Sheet
  • ASTM A240 Tp304 Stainless Steel Polished Sheet
  • 2B Finish Stainless Steel 304 Thin Sheet
  • #8 Finish Stainless Steel 304 Sheet
  • Stainless Hairline 304 Sheet

304 Stainless Steel Sheet Food and Dairy product processing and storage

It is most commonly-used stainless steel food alloy which is used for an extensive range of industries. It is highly utilized since it can resist corrosion produced by an extensive range of chemicals and it can also be electro polished to a shiny, smooth, easy-to-clean surface.

But, some corrosives and excessive exposure to salt yet still demean 304 stainless steel quality.

316 Stainless Steel Sheet Food and Dairy product processing and storage 

It is an austenitic stainless steel alloy which has high content of chromium and nickel. Similar to many steel alloys, it has a continuous use temperature various times higher than most food making processes will ever need. 

It is highly resistant to acids, alkalis, and chlorides such as salt and this makes it an ideal food grade steel sheet material.

Grade 304 SS, can experience severe pitting corrosion when it is exposed to salt, which is frequently available in food products. Grade 316 SS is a great material for Food and Dairy product processing and storage.

Difference between thickness of SS 304 Sheet and Grade 304 Plate

The difference between stainless steel 304 sheets and plate is its thickness to which the metal is rolled out. 

SS 304 plate usually has a thickness or gauge of more than 6mm and SS 304 sheet has a thickness of less than 6mm, but greater than that of foil. As a general principle, the thinner the metal, the larger will be its gauge number.

Both SS 304 sheet and plate can be offered in dull or satin polished with one side protective coating. 

Stainless Steel 304 sheet and plate are most commonly used grade and less expensive. It is highly flexible provides good corrosion resistance and also maintains durability.

A Global supplier

If You Require The 304 2B Stainless Steel Sheet In Below Countries We Can Offer You Quick Delivery At Best Price As Already Supplying Here Check What?

304 Stainless Steel Sheet Suppliers In India

304 Stainless Steel Sheet Suppliers In India

Stainless Steel 304 Plate

Stainless Steel 304 Plate


Thailand, Iran, China, Los Alamos -Mexico, Malaysia, Dubai- UAE, Turkey, Taiwan, Europe, Italy, Peru, Poland, Singapore, NY 12203 (USA), South Africa, Bahrain, Czechia, Romania, France, Denmark Jakarta -Indonesia, Oman, Kuala Lumpur, Spain, Malaysia, Colombia, Jordan, Jakarta, Vietnam, Australia, Mexico, Belgium, Netherlands, Saudi Arabia (KSA), Malaysia, Sweden, USA, Dammam -KSA,

ASME SA240 SS 304 Coil

ASME SA240 SS 304 Coil


New Zealand, Chile, Bangladesh, Tehran -Iran, United Arab Emirates (UAE), Hong Kong, Finland, Japan, Kuwait, Nigeria, Austria, Argentina, Qatar, South Africa, Brazil, Indonesia, Germany, Russia, Ellington -United States, Dubai, Portugal, Istanbul- Turkey, Norway, United Kingdom (UK), Philippines, Morocco, Singapore, Canada, United States, Egypt, South Korea, Greece