• +91 22 66363099
  • info@spmetal.net

Hastelloy C276 Pipe Fittings


Hastelloy C276 Pipe Fittings
What is Hastelloy C276 Pipe Fittings?

Hastelloy C276 pipe fittings are nickel, chromium, and molybdenum alloys with an addition of tungsten. The superior concentration of these superalloys gives these components superior corrosion resistance across different environments. The fittings are strong and robust and help in shaping the characteristics of the flow. The superior pitting resistance coupled with enhanced resistance to crevice corrosion makes these fittings a reliable choice in a stress-induced system. The fittings can be easily welded in place due to their lower carbide precipitation properties. Alloys within this grade are resistant to post-weld graining or the formation of a heat-affected zone.

Alloy C276 Buttweld Pipe Elbow gas and Oil Application

Alloy C276 Buttweld pipe elbow is a high strength component, which is used to, change the direction of fluid or gases across the system. The high-strength components show high resistance against pitting and corrosive systems, making them a top candidate in the gas and oil systems. The elbows of this grade are widely utilized in transportation and storage systems. They are also employed in drilling, cooling tanks and pressure vessels.

Comparision Between C276 Hastelloy End Cap and UNS N10276 Lateral Tee

Pipe fittings play an important role in changing the flow characteristics and providing the system protection in a range of systems. A C276 Hastelloy end cap is utilized to seal hydraulic ends of piping modules. These caps also act as modules to securely protect the pipe during transportation and against corrosive media. UNS N10276 lateral tee is designed with three outlets. One of the outlets is at a 45-degree angle and facilitates the supply of fluids and gases across three channels.

ANSI B16.9 Hastelloy C276 Tee vs Alloy C276 Reducer

ANSI B16.9 Hastelloy C276 tee and alloy C276 reducer are common fittings in this grade. The fittings can be characterized by some key features. 

  • ANSI B16.9 Hastelloy C276 tee is designed with three-branched openings. These three openings allow the flow of fluids or gases across three channels is reduced or in equal proportion.
  • Alloy C276 reducer is designed to combine pipes of unequal sizes to each other. These reducers are available in a range of sizes to suit different applications.

ASTM B366 UNS N10276 Elbow and Hastelloy C276 Fittings Manufacturer in India


Hastelloy C276 Fittings Manufacturers in India

Why don't you directly contact a DIN 2.4819 Pipe Bend, Hastelloy Pipe Fittings supplier in India? We produce as per your drawing, check specification of Alloy C276 Fittings and Hastelloy Fittings


Hastelloy C276 Pipe Fittings Specification
ThicknessSCH20, SCH10, SCH30, SCH60,STD SCH40, XS, SCH 100, SCH 80, SCH 120, SCH 160, SCH 140, XXS available with NACE MR 01-75
SpecificationsAstm B366
sizeSeamless Butt Weld Fittings: 1/2 Inch - 10 Inch
Welded Butt Weld Fittings: 1/2 Inch - 48 Inch
DimensionsASME B16.28, ANSI/ASME B16.9, MSS-SP-43, BS4504, BS4504, BS10, BS1560
TypeDN15 to DN1200
Bending RadiusR=2D, 1D, 3D, 6D, 5D, 10D 8D, or Custom MSS Sp-43 Alloy C276 Pipe Fitting
Size Range½" NB to 24" NB in Sch 40s, 10s, 80s, XXS, 160s. (DN6~DN100)
Elbows Standard: ASME B16.28, ASME B16.9, DIN2605 MSS SP-75 ASME B16.25, JISB2312 JISB2311 JISB2313, GB, BS, ISO
Angle : 30deg, 22.5 deg, 45 deg, 180 deg, 90 deg, 1.0D, 2.0D, 1.5D, 2.5D, 4D, 3D, 5D,7D-40D, 6D .
Manufacturing processCast, Forge, Press,Push, etc.
ConnectionWelding
Key markets and industries
  • Heavy oil refineries.
  • Bitumen upgraders.
  • Nuclear power (mostly seamless).
  • acids & Petrochemicals .
Specialized manufacturer of45º Elbows, 90º Elbows, Tees, Reducers,Crosses, Pipe Cap, Pipe Bend, Stub End
Test CertificatesRaw Materials Certificate
EN 10204/3.1B
Third Party Inspection Report, etc100% Radiography Test Report
uses and Application
  • Schedule 10 fittings are an economical alternative for lower-pressure applications.
  • Fittings To Connect Tube & Pipes in Petroleum, Chemical, Power, Construction, Metallurgy, Gas, Shipbuilding etc
  • Schedule 40 fittings have a thicker wall for higher-pressure applications.
We provide Material Test Certificates (MTC) as per EN 10204 3.2, and EN 10204 3.1 Test Certificates certifying NACE MR0103, NACE MR0175

Looking for Hastelloy C276 Pipe Fittings suppliers who offer prompt delivery in Asia? Manufacturer of Hastelloy C276 Fittings in India, call us for big discount and ready sizes, check latest price of Hastelloy Pipe Fittings in Mumbai

Hastelloy C276 Fittings Price
DescriptionPer Unit (INR)
HASTELLOY C276 FITTING- COUPLING - 1/2FNPT X 1/2 FNPT4,227
HASTELLOY C-276- PIPES & PIPE FITTINGS REDUCER ECC HASTELLOY C-276 SIZE 4 X 3 X SCH4027,142
HASTELLOY C-276- PIPES & PIPE FITTINGS NIPPLE SIZE-1INCH, SCH XS, SB-HASTELLOY C-276, POE/TOE4,303
HASTELLOY C-276- PIPES & PIPE FITTINGS ELBOW 90 SIZE:4INCH/SCH 40 SB 336 HASTELLOY C -276 (BUTT WELD)47,002
HASTELLOY C276 FITTINGS : 1 FMPT X 1SW65,355
HASTELLOY C276 FITTINGS : 1 FEMALE NPT65,355
HASTELLOY C276 FITTINGS - 1/2 X SCH 10TEE1,659
HASTELLOY C276 FITTINGS - 1/2 X SCH 10ELBOW1,062
UNS N10276 Material Equivalent
STANDARDUNSWERKSTOFF NR.JISBSGOSTAFNOREN
Hastelloy C276 Pipe FittingsN102762.4819NW 0276ХН65МВУNiMo16Cr15W
Hastelloy C276 Chemical Composition
Hastelloy C276 Pipe Fittings Chemical Composition, %
Vanadium≤0.35
NickelBalance
Iron5
Tungsten4
Carbon≤0.01
Copper≤0.5
Silicon≤0.08
Chromium16
Molybdenum16
Manganese≤1
Cobalt≤2.5
Alloy C276 Fittings Mechanical Properties
DensityYield Strength (0.2%Offset)ElongationMelting PointTensile Strength
Hastelloy C276 Pipe FittingsPsi – 52,000 , MPa – 35540%8.89 G/Cm331370 °C (2500 °F)Psi – 1,15,000 , MPa – 790

Supplier of ASTM B366 UNS N10276 45/ 90/ 180 Degree Elbow. View Hastelloy Alloy Pipe Cap Stock

Stock of Hastelloy Pipe Fittings
Alloy C276 90 Degree ElbowASME SB366 Alloy C276 End Cap
C276 Hastelloy FittingsHastelloy Alloy C276 Pipe Fitting
Alloy C276 3D ElbowHastelloy C276 End Cap
Nickel C276 45 Degree ElbowASTM B366 UNS N10276 Buttweld Fitting
ASTM B366 UNS N10276 5D ElbowHastelloy Alloy C276 Reducer
Nickel C276 Equal CrossHastelloy Alloy C276 Pipe Cap
C276 Hastelloy Lateral TeeASME SB366 Alloy C276 Cross Tee
ASTM B366 UNS N10276 Stub EndC276 Hastelloy Pipe Cap
Hastelloy C276 1D ElbowHastelloy DIN 2.4819 Short Stub End
ASTM B366 UNS N10276 Eccentric ReducerASME SB366 Alloy C276 Long Radius Elbow
C276 Hastelloy Buttweld FittingsASME SB366 Alloy C276 Pipe Bend
Nickel C276 Pipe FittingsHastelloy C276 Long Stub End
Hastelloy DIN 2.4819 Concentric ReducerAlloy C276 Short Radius Elbow
Hastelloy DIN 2.4819 Reducing CrossASTM B366 UNS N10276 Equal Cross
Hastelloy Alloy C276 Equal TeeHastelloy C276 Stub End
Alloy C276 Concentric ReducerNickel C276 5D Elbow

Manufacturer & Supplier Of Hastelloy Tube Fittings, Hastelloy Camlock Fittings In India

ASTM B366 UNS N10276 Hastelloy Fittings Types
Hastelloy C276 Pipe Fittings
Hastelloy C276 Pipe Fittings
Hastelloy C276 Fittings
Hastelloy C276 Fittings
Hastelloy Pipe Fittings
Hastelloy Pipe Fittings
Hastelloy Fittings
Hastelloy Fittings
Hastelloy Tube Fittings
Hastelloy Tube Fittings
Hastelloy Camlock Fittings
Hastelloy Camlock Fittings
Hastelloy C276 Tube Fittings
Hastelloy C276 Tube Fittings
Hastelloy C Pipe Fittings
Hastelloy C Pipe Fittings
Alloy C276 Pipe Bends
Alloy C276 Pipe Bends
ASTM B366 UNS N10276 Material
ASTM B366 UNS N10276 Material
Hastelloy C276 Fittings
Hastelloy C276 Fittings
Alloy C276 Fittings
Alloy C276 Fittings
Hastelloy C276 Buttweld Fittings
Hastelloy C276 Buttweld Fittings
Hastelloy C276 Elbow
Hastelloy C276 Elbow
Hastelloy C276 Tee
Hastelloy C276 Tee
ASTM B366 Hastelloy C276 End Cap
ASTM B366 Hastelloy C276 End Cap
Hastelloy C276 Reducer
Hastelloy C276 Reducer
Hastelloy C276 Long Radius Elbow
Hastelloy C276 Long Radius Elbow
Hastelloy Forged Fittings
Hastelloy Forged Fittings
Hastelloy C276 90° Long Radius Elbow
Hastelloy C276 90° Long Radius Elbow
Alloy C276 90° Short Radius Elbow
Alloy C276 90° Short Radius Elbow
Hastelloy UNS N10276 45° Long Radius Elbow
Hastelloy UNS N10276 45° Long Radius Elbow
ASTM B366 UNS N10276 45° Short Radius Elbow
ASTM B366 UNS N10276 45° Short Radius Elbow
Inconel C276 180° Long Radius Elbow
Inconel C276 180° Long Radius Elbow
DIN 2.4819 Hastelloy 180° Short Radius Elbow
DIN 2.4819 Hastelloy 180° Short Radius Elbow
Nickel Alloy C276 1D Elbow
Nickel Alloy C276 1D Elbow
Hastelloy C276 UNS N10276 1.5D Elbow
Hastelloy C276 UNS N10276 1.5D Elbow
ASME SB 366 UNS N10276 3D Elbow
ASME SB 366 UNS N10276 3D Elbow
Hastelloy Alloy C276 5D Elbow
Hastelloy Alloy C276 5D Elbow
ASME B16.9 Hastelloy C276 10D Elbow
ASME B16.9 Hastelloy C276 10D Elbow
NW 0276 Seamless Buttwelding 45° Elbow
NW 0276 Seamless Buttwelding 45° Elbow
Hastelloy C276 90° Elbows
Hastelloy C276 90° Elbows
Alloy C276 Welded Elbows
Alloy C276 Welded Elbows
Hastelloy UNS N10276 Seamless Buttwelding 180° Returns
Hastelloy UNS N10276 Seamless Buttwelding 180° Returns
ASTM B366 UNS N10276 Straight Tees
ASTM B366 UNS N10276 Straight Tees
Inconel C276 Straight Crosses
Inconel C276 Straight Crosses
DIN 2.4819 Hastelloy Reducing Outlet Tees
DIN 2.4819 Hastelloy Reducing Outlet Tees
Nickel Alloy C276 Reducing Outlet Crosses
Nickel Alloy C276 Reducing Outlet Crosses
Hastelloy C276 UNS N10276 Equal Tee
Hastelloy C276 UNS N10276 Equal Tee
ASME SB 366 UNS N10276 Reducing Tee
ASME SB 366 UNS N10276 Reducing Tee
Hastelloy Alloy C276 Equal Cross
Hastelloy Alloy C276 Equal Cross
ASME B16.9 Hastelloy C276 Reducing Cross
ASME B16.9 Hastelloy C276 Reducing Cross
NW 0276 Reducers
NW 0276 Reducers
Hastelloy C276 Concentric Reducer
Hastelloy C276 Concentric Reducer
Alloy C276 Eccentric Reducer
Alloy C276 Eccentric Reducer
 UNS N10276 Stub End
UNS N10276 Stub End
ASTM B366 UNS N10276 Lap Joint Stub Ends
ASTM B366 UNS N10276 Lap Joint Stub Ends
Inconel C276 Long Stubend
Inconel C276 Long Stubend
DIN 2.4819  Short Stubend
DIN 2.4819 Short Stubend
Nickel Alloy C276 Pipe Cap
Nickel Alloy C276 Pipe Cap
Alloy C276 UNS N10276 End Cap
Alloy C276 UNS N10276 End Cap
ASME SB 366 UNS N10276 Collar
ASME SB 366 UNS N10276 Collar
 Alloy C276 Swage Nipple
Alloy C276 Swage Nipple
ASME B16.9 Hastelloy C276 Pipe Nipples
ASME B16.9 Hastelloy C276 Pipe Nipples
NW 0276 Barrel Nipple
NW 0276 Barrel Nipple
Hastelloy C276 Reducing Nipple
Hastelloy C276 Reducing Nipple
Alloy C276 Bend
Alloy C276 Bend
 UNS N10276 Long Radius Bend
UNS N10276 Long Radius Bend

Well-known Hastelloy C276 Pipe Fittings Manufacturer in India. For final Hastelloy C Pipe Fittings and Hastelloy C276 Tube Fittings Price List Please Call on +91 22 6636 3099.

PED Certified Hastelloy Fittings manufacturer in India, Dimensions Of Hastelloy C276 Elbow In MM.

Manufacturer of Nickel Alloy C276 Stub End and ASME B366 UNS N10276 Equal/ Unequal Tee offers penetration inspection with each delivery
Various Types of Hastelloy C276 Socketweld Branch Outlets
Hastelloy C276 90° Elbow
Hastelloy C276 90° Elbow
Alloy C276 45° Elbow
Alloy C276 45° Elbow
Hastelloy UNS N10276 3d Long Radius Bend
Hastelloy UNS N10276 3d Long Radius Bend
ASTM B564 UNS N10276 5d Long Radius Bend
ASTM B564 UNS N10276 5d Long Radius Bend
Hastelloy C276 6d Long Radius Bend
Hastelloy C276 6d Long Radius Bend
DIN 2.4819 Hastelloy 8d Long Radius Bend
DIN 2.4819 Hastelloy 8d Long Radius Bend
Nickel Alloy C276 10d Long Radius Bend
Nickel Alloy C276 10d Long Radius Bend
Hastelloy C276 UNS N10276 12d Long Radius Bend
Hastelloy C276 UNS N10276 12d Long Radius Bend
ASME SB 564 UNS N10276 Tee
ASME SB 564 UNS N10276 Tee
 Alloy C276 Cross
Alloy C276 Cross
ASME B16.11 C276 Full Coupling
ASME B16.11 C276 Full Coupling
NW 0276 Half Coupling
NW 0276 Half Coupling
Hastelloy C276 Reducing Coupling
Hastelloy C276 Reducing Coupling
Alloy C276 Pipe Cap
Alloy C276 Pipe Cap
 UNS N10276 Hex Head Bushing
UNS N10276 Hex Head Bushing
ASTM B564 UNS N10276 Hex Head Plug
ASTM B564 UNS N10276 Hex Head Plug
Hastelloy C276 Square Head Plug
Hastelloy C276 Square Head Plug
DIN 2.4819 Round Head Plug
DIN 2.4819 Round Head Plug
Nickel Alloy C276 Union
Nickel Alloy C276 Union
UNS N10276 Hex Nipple
UNS N10276 Hex Nipple
ASME SB 564 UNS N10276 Street Elbow
ASME SB 564 UNS N10276 Street Elbow
 Alloy C276 Bull Plug
Alloy C276 Bull Plug
ASME B16.11 Hastelloy C276 Boss
ASME B16.11 Hastelloy C276 Boss
NW 0276 Swage Nipple
NW 0276 Swage Nipple
Hastelloy C276 Pipe Nipple
Hastelloy C276 Pipe Nipple
Alloy C276 Adapter
Alloy C276 Adapter
 UNS N10276 Male Union
UNS N10276 Male Union
ASTM B564 UNS N10276 Female Union
ASTM B564 UNS N10276 Female Union
Hastelloy C276 Branch Outlet
Hastelloy C276 Branch Outlet
DIN 2.4819 Hastelloy 90° Elbow Outlet
DIN 2.4819 Hastelloy 90° Elbow Outlet
Nickel Alloy C276 45° Lateral Tee
Nickel Alloy C276 45° Lateral Tee
UNS N10276 Lateral Outlet
UNS N10276 Lateral Outlet
ASME SB 564 UNS N10276 Nipple Branch Outlet
ASME SB 564 UNS N10276 Nipple Branch Outlet
 Alloy C276 Socket weld Reducers
Alloy C276 Socket weld Reducers
ASME B16.11 Hastelloy C276 Socket weld Concentric Reducer
ASME B16.11 Hastelloy C276 Socket weld Concentric Reducer
NW 0276Hastelloy C276 Socket Weld Eccentric Reducer
NW 0276Hastelloy C276 Socket Weld Eccentric Reducer
Alloy C276 Socket Weld Equal Tee
Alloy C276 Socket Weld Equal Tee
 UNS N10276 Socket Weld Unequal Tee
UNS N10276 Socket Weld Unequal Tee
ASTM B564 UNS N10276 Socket Weld Adapters
ASTM B564 UNS N10276 Socket Weld Adapters
Hastelloy C276 Socket Weld Pipe Nipples
Hastelloy C276 Socket Weld Pipe Nipples
DIN 2.4819 Hastelloy Outlets
DIN 2.4819 Hastelloy Outlets
Nickel Alloy C276 Weldolet
Nickel Alloy C276 Weldolet
UNS N10276 Sockolet
UNS N10276 Sockolet
ASME SB 564 UNS N10276 Threadolet
ASME SB 564 UNS N10276 Threadolet
 Alloy C276 Nipolet
Alloy C276 Nipolet
ASME B16.11 Hastelloy C276 Latrolet
ASME B16.11 Hastelloy C276 Latrolet
NW 0276 Elbolet
NW 0276 Elbolet
Hastelloy C276 Threaded Elbolet
Hastelloy C276 Threaded Elbolet
Alloy C276 Socket weld Elbolet
Alloy C276 Socket weld Elbolet
 UNS N10276 Sweepolet
UNS N10276 Sweepolet
ASTM B564 UNS N10276 Insert Weldolet
ASTM B564 UNS N10276 Insert Weldolet
Hastelloy C276 Brazolet
Hastelloy C276 Brazolet
DIN 2.4819 Coupolet
DIN 2.4819 Coupolet
Nickel Alloy C276 Flexolet Butt Weld
Nickel Alloy C276 Flexolet Butt Weld
UNS N10276 Flexolet Socket Weld
UNS N10276 Flexolet Socket Weld
ASME SB 564 UNS N10276 Flexolet Threaded
ASME SB 564 UNS N10276 Flexolet Threaded

Get instant delivery Of UNS N10276 Reducer , Dimension Chart Of Nickel Alloy C276 Long Radius Elbow, Hastelloy Forged Fittings Manufacturer In Mumbai. India.

16inch Sch 40s 45 degree Butt-Welded Nickel Alloy C276 Compression Tube, Forged and UNS N10276 Buttweld Fittings Manufacturer in India. Check Pressure Chart of C276 Hastelloy Eccentric / Concentric Reducer
ASME SB366 UNS N10276 Hastelloy Camlock Fittings Pressure Chart
ASME B16.9 Pressure Ratings
ASME B16.9 Fittings Temperature RatingsTypes Of Pressure Ratings Class
Class 150#Class 300#
1/4 - 1 (Inch)1 1/4 - 2 (Inch)2 1/2 - 3 (Inch)
(oF)(oC)
-20 to 150-29 to 66300200015001000
2009326517851350910
25012122515751200825
30014918513601050735
3501771501150900650
400204-935750560
450232-725600475
500260-510450385
550288-300300300
Test Certificate of Hastelloy C276 Tube Fittings
  • 100% Radiography Test Report
  • Raw Materials Certificate
  • Third Party Inspection Repor
  • EN 10204/3.1B,
Hastelloy C Pipe Fittings Value Added Services
  • Chemical Analysis – Spectro Analysis
  • Intergranular Corrosion (IGC) Test
  • Hardness Test
  • Chemical Equipment
  • Pitting Resistance Test
  • Positive Material Identification – PMI Testing
  • Micro and MacroTest
  • Flattening Test
  • Mechanical Testing Such as Tensile of Area
Alloy C-276 Fittings Marking
  • Size = (3"*2"")
  • Name of Manufacturer = (SP Metals)
  • Fittings Type = (Equal Tee)
  • Material Designation = (ASTM B366 N10276)
  • Schedule = (SCH 160S)
  • Standard = (ASME B16.9)
Alloy C-276 Fittings Marking
Documentation of Hastelloy C276 Buttweld Fittings
  • Fumigation Certificates
  • Guarantee Letter
  • Raw Material Test Reports
  • Fumigation Certificates
  • Heat Treatment Charts
  • Commercial Invoice which includes HS Code
  • QAP (Quality Assurance Plan)
  • NABL approved Laboratory Test Reports

Check Electrical Conductivity Of Werkstoff Nr. 2.4819 Tee and ASTM B366 Hastelloy C276 End Cap Supplier & Manufacturers In Mumbai, India.

Hastelloy C276 Pipe FIttings Electrical Conductivity
Physical PropertyBritish UnitsMetric Units
Electrical ResistivityRT48.4 μohm.inRT1.23 μohm.m
200°F48.7 μohm.in100°C1.24 μohm.m
400°F49.0 μohm.in200°C1.25 μohm.m
600°F49.5 μohm.in300°C1.26 μohm.m
800°F49.8 μohm.in400°C1.26 μohm.m
1000°F50.6 μohm.in500°C1.28 μohm.m
--600°C1.30 μohm.m
UNS N10276 Heat Treatment

HASTELLOY(r) C276 is solution heat treated at 1121°C (2050°F) and then quenched rapidly. In case of forging or hot forming, the parts should first be solution heat treated before usage.

ASTM B366 Hastelloy C276 Density
PropertiesMetricImperial
Density8.89 g/cm³0.321 lb/in³
Hastelloy C276 Coefficient Of Thermal Expansion
PropertiesMetricImperial
Thermal expansion co-efficient (@24-93°C/75.2-199°F)11.2 µm/m°C6.22 µin/in°F
Thermal conductivity (-168 °C)7.20 W/mK50.0 BTU in/hr.ft².°F
A Global supplier

Know what exactly we supply and where it goes

Hastelloy C276 Pipe Fittings Manufacturer In India

Hastelloy C276 Pipe Fittings Manufacturer In India

Alloy C-276 Fittings

Alloy C-276 Fittings


Los Alamos -Mexico, Germany, Jakarta -Indonesia, Malaysia, Indonesia, Australia, Singapore, Austria, Bahrain, Sweden, Denmark Malaysia, Nigeria, Istanbul- Turkey, Saudi Arabia (KSA), Greece, Vietnam, Romania, Taiwan, NY 12203 (USA), South Africa, Turkey, Morocco, Europe, South Africa, Hong Kong, New Zealand, United States, Netherlands, Ellington -United States, Finland

ASTM B366 UNS N10276 Hastelloy Fittings

ASTM B366 UNS N10276 Hastelloy Fittings

Colombia, Qatar, France, Czechia, Iran, Argentina, Belgium, Spain, USA, Malaysia, Poland, China, Bangladesh, Jordan, United Arab Emirates (UAE), Portugal, South Korea, Japan, Russia, Italy, Thailand, Philippines, Jakarta, Mexico, Oman, Canada, Dubai, Dammam -KSA, Norway, Singapore, Tehran -Iran, United Kingdom (UK), Kuwait, Egypt, Brazil, Chile, Peru, Dubai- UAE, Kuala Lumpur