309s Stainless Steel Tube Manufacturer, 309s Stainless Steel Tube Supplier

ASTM A213 TP309s Stainless Steel Tube

ASTM A213 TP309s, ASTM A213 uns S30908, ASME SA213 TP309s, 309s Stainless Steel Tube Supplier, Stainless Steel 309s Square Tube, SS 309s Rectangular Tube, SS 309s Tube Supplier, Stainless Steel 309s Electropolished Tube, 309s Stainless Steel Exhaust Tube



Stainless Steel 309s Tube Manufacturer in india, Stainless Steel 309s werkstoff nr. 1.4833 Tube, Stainless Steel UNS S30908 Tube, DIN 1.4833 Stainless Steel 309s Tube, AISI 309s Tube, Inox 309s Tube, ASTM A213 TP309s Stainless Steel Tube, ASTM A213 TP 309s

sus309s stainless steel Tube exporter in india, UNS S30908 Tube distributors, 309s ibr stainless steel Tube stockist, Jindal 309s stainless steel Tube stockholder, 309s Stainless Steel Extruded Tube wholesaler, 309s Stainless steel hydraulic Tube importers, schedule 40 ss 309s Tube, schedule 10 ss 309s Tube, NPS 6 schedule 160 ss309s Tube

Contents:

Stainless Steel is often Referred to as Corrosion-Resistant Steel – it does not stain, Corrode or Rust as easily as Normal Carbon Steel. It would however be misleading to say it is Corrosion-Proof. It differs significantly from standard Carbon Steel due to the amount of Chromium present, which limits surface Corrosion unlike Carbon Steel which will Rust when exposed to air and any moisture in the Atmosphere. Due to its Anti-Oxidation Qualities, Stainless Steel is often a Popular Solution.
Where low maintenance and corrosion resistance is required, stainless steel plates are a natural choice and are used in a diverse range of applications from modern Architecture for cladding or fascia’s, to the food hygiene industry due to its Anti-Bacterial Qualities. Savoy Piping Inc., Supplies Stainless Steel in a wide variety of Grades and Aesthetic Finishes. There are many options available - for example adding carbon during the forming process will make the stainless steel more durable and stronger too.

Alloy 309 (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The alloy resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).

Because of its high chromium and low nickel content, Alloy 309 can be utilized in sulfur containing atmospheres up to 1832°F (1000°C). The alloy is not recommended for use in highly carburizing atmospheres since it exhibits only moderate resistance to carbon absorption. Alloy 309 can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced.

When heated between 1202 – 1742°F (650 – 950°C) the alloy is subject to sigma phase precipitation. A solution annealing treatment at 2012 – 2102°F (1100 – 1150°C) will restore a degree of toughness.

309S (UNS S30908) is the low carbon version of the alloy. It is utilized for ease of fabrication.

SP Metal specializes in ASTM A213 TP309s Stainless Steel Pipe, SUS 309s Tube Stockist, ANSI 309s Tube with years of Experience in Manufacturing ASTM A213 TP 309s SS Tube, ASME SA213 SS 309s Tube. we offer high quality, lower cost but the best service. As a result to that our 309s SS Heat Exchanger Tube, ASME SA213 TP 309s SS Tube, ASME SA213 SS 309s Tube Supplier export account today is in various countries


Who we are ?

  • 309s Stainless Steel Tube Manufacturers in india
  • 309s Stainless Steel Tube suppliers in india
  • 309s Stainless Steel Tube exporters in india
  • 309s Stainless Steel Tube distributors in india
  • 309s Stainless Steel Tube traders in india
  • 309s Stainless Steel Tube stockist in india
  • 309s Stainless Steel Tube stockholder in india
  • 309s Stainless Steel Tube wholesaler in india
  • 309s Stainless Steel Tube importers in india
  • 309s Stainless Steel Tube manufacturer in Mumbai,Maharashtra
  • 309s Stainless Steel Tube manufacturers in rajkot,Gujarat
  • 309s stainless steel Tube nippon sumitomo dealer in india
  • manufacturer of 309s Stainless Steel Tube in india
  • supplier of 309s Stainless Steel Tube in india
  • exporter of 309s Stainless Steel Tube in india
  • distributor of 309s Stainless Steel Tube in india
  • trader of 309s Stainless Steel Tube in india
  • stockist of 309s Stainless Steel Tube in india
  • stockholder of 309s Stainless Steel Tube in india
  •  
  •  
309s Stainless Steel Tube Manufacturers in india

ASTM A213 TP309s Stainless Steel Tube Specification :

Specifications : ASTM A213 / SA 213
Dimensions : ASTM, ASME and API
Size : 1/8″NB TO 30″NB IN
Seamless 309s Tube : 1/2" NB - 16" NB
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : ASTM A 213 TP 309s Tube
Specialized in : Large Diameter Size
Length : Single Random, Double Random & Cut Length.
Form : Round, Square, Rectangular, Hydraulic Etc
End : Plain End, Beveled End, Treaded

 


Stainless Steel 309s Tube Specification
ASTM A269, ASTM A213, ASTM A213, ASME SA269, ASME SA213, ASME SA213
Stainless Steel 309s Tube Grades
202, 304, 304L, 304H, 304LN, 309S, 310S, 316, 316L, 316H, 316Ti, 316LN, 317L, 321, 321H, 347, 347H, 904L, SMO 254, ALLOY 254, 6MO, 6MOLY, UNS S31254 ETC.
Stainless Steel 309s Tube Type
SEAMLESS / WELDED / ERW / EFW / COLD DRAW / HOT FINISH / COLD FINISH
Stainless Steel 309s Tube Outer Diameter Size
SEAMLESS - 1/2" NB TO 18" NB
WELDED / ERW- 1" NB TO 16" NB
EFW - 8" NB TO 110" NB
Stainless Steel 309s Tube Wall Thickness
Schedule 10 To Schedule 160 (3 mm to 100 mm Thickness)
Stainless Steel 309s Tube Length
01 Meter to 12.5 Meters, Single Random Length, Double Random Length And Customize Size.
Stainless Steel 309s Tube Ends
Plain Ends / Beveled Ends
Stainless Steel 309s Tube Delivery Conditions
As Rolled, Formed, Stress Relieved, Annealed, Hardened, Tempered, Cold Draw
Stainless Steel 309s Tube Coating
Electropolish, Mechanical Polish, Satin Finish, Passivated
Stainless Steel 309s Tube Other Testing
Product Analysis, Transverse Tension Test, Flattening Test, Etching Test, Radiographic Examination, Stabilizing Heat Treatment, Intergranular Corrosion Test, Weld Decay Test, Magnetic Particle Detection, Grain Size Test, NACE 0175, Dual Grade, PWHT (POST WELD HEAT TREATMENT), Flare Test, Bend Test, Hardness Test, Tensile Test etc
Stainless Steel 309s Tube Dimension
All Tubes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM and ASME
Stainless Steel 309s Tube Value Added Services
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Stainless Steel 309s Tube Packaging
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Stainless Steel 309s Tube Shipment & Transportation
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Stainless Steel 309s Tube Material Test Certificate
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

ASTM A213 TP309s Stainless Steel Tube Products Size Range

OUT DIAMETER WALL THICKNESS LENGTH
NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters
Seamless (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters
Welded (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters


ASTM A213 TP309s Stainless Steel Tube Stocking and Processing Service Program

Stainless Steel 309s Tube
Form Welded and Seamless
Type Fluid, Food, Decorative, Structural
Round Tube (mm) 4.76 OD to 203.2 OD
Spiral welded (mm) 76.2 OD to 1016 OD
Square (mm) 12.7 to 152.6 A/F
Rectangular (mm) 25.4 x 12.7 to 203.2 x 101.6
Grades 304, 316, 304/304L, 316/316L, 409, 2205
Wall Thickness 0.33 to 5.0mm
Fittings BSM, tri-clamp, butt welding, flanges, clamps to suit
Processing Cut-to-length, polishing

ASTM A213 TP309s Stainless Steel Tube supplier

ASTM A213 TP309s Stainless Steel Tube, ASME SA213 TP309s Stainless Steel Tube, ASTM A213 UNS S30908 Tube, A213 UNS S30908 Tube` suppliers in India

ASTM A213 TP309s Stainless Steel Tube Trade Name & Size :

  • ASTM A213 TP309s Stainless Steel Tube suppliers

    ASTM A213 TP309s Stainless Steel Tube supplier

  • ASTM A213 TP309s Stainless Steel Tube Manufacturer
  • ASTM A213 TP309s SS Tube distributor in India
  • Stainless Steel ASTM A213 TP 309s Material supplier
  • ASTM A213 TP309s Stainless Steel Tube Size: 6.35 mm OD To 152 mm OD

Origin Standard: American Standard, Russia Standard, Janpanese Standard, European Standard

SHORTEST Possible Delivery: Shutdown / Emergency/ Project Rush Demands

Certification: ISO EN 10204 3.1/ 3.1B/ 3.2, PED, DNV, TUV.

End: Plain End, Beveled End, Threaded

Manufacturers:

  • Sumitomo Metals, Japan
  • Nippon Steel Corporation, Japan
  • Kobe Special Tube, Japan
  • Sanyo Special Steel, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller Bleckmann, Austria
  • Seah Steel Corporation, Korea


ASTM A213 TP309s Stainless Steel Protection tube supplier

AISI Stainless Steel Protection tube, ASTM A213 TP309s UNS S30908 Protection tube, A213 SS 309s Protection tube supplier

ASTM A213 Stainless Steel 309s Protection tube Trade Name & Size:

  • ASTM A213 TP309s Stainless Steel Protection tube supplier

    ASTM A213 TP309s Stainless Steel Protection tube supplier

  • ASTM A213 Stainless Steel 309s Protection tube Manufacturer
  • ASTM A213 309s Protection tube distributor in Singapore
  • Stainless Steel ASTM A213 Material supplier
  • Stainless Steel 309s Protection tube
  • SS 309s Protection tube
  • 309s Protection tube
  • ASTM A213 TP309s Stainless Steel Protection tube Size: 6.35 mm OD To 152 mm OD





ASTM A213 TP309s Stainless Steel Extruded Tube supplier

AISI 309s Extruded Tube, ASTM A213 309s Extruded Tube, A213 SS 309s Extruded Tube supplier, A213 UNS S30908 Extruded Tube. Check our Latest price before you buy

ASTM A213 Stainless Steel 309s Extruded Tube Trade Name & Size:

  • ASTM A213 TP309s Stainless Steel Extruded Tube supplier

    ASTM A213 TP309s Stainless Steel Extruded Tube supplier

  • ASTM A213 Stainless Steel 309s Extruded Tube Manufacturer
  • ASTM A213 309s Extruded Tube distributor in India
  • Stainless Steel ASTM A213 Material supplier
  • Stainless Steel 309s Extruded Tube
  • SS 309s Extruded Tube
  • 309s Extruded Tube
  • ASTM A213 Stainless Steel 309s Extruded Tube Size: 6.35 mm OD To 152 mm OD





Thin wall stainless steel 309s Tube

We are Manufacturers & supplier of Thin wall stainless steel 309s Tube in India. Looking for trusted dealer & distributor for Thin wall stainless steel 309s Tube in India? Information for those interested in buying Thin wall 309s stainless steel Tube. India’s Largest stockholder of SS 309s Thin wall Tube offer best price in India.

    Thin wall stainless steel 309s Tube Manufacturer in India

    Thin wall stainless steel 309s Tube Manufacturer in India

  • ASTM A213 Stainless Steel 309s Thin wall Tube Manufacturer
  • ASTM A213 309s Thin wall Tube distributor in India
  • Stainless Steel ASTM A213 Material supplier
  • Stainless Steel 309s Thin wall Tube
  • SS 309s Thin wall Tube
  • Thin wall 309s Stainless Steel Tube
  • Thin wall SS 309s Tube
  • ASTM A213 Stainless Steel 309s Thin wall Tube Size: 6.35 mm OD To 152 mm OD




ASTM A213 TP309s Stainless Steel Round Tube supplier

AISI 309s Stainless Steel Round Tube, ASTM A213 309s Round Tube, A213 SS 309s Round Tube, A213 UNS S30908 Round Tube supplier, Trusted & Best company in India

    ASTM A213 Stainless Steel 309s Round Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Round Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Round Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Round Tube Manufacturer
  • ASTM A213 SS 309s Round Tube distributor in India
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Round Tube
  • Stainless Steel 309s Round Tube
  • SS 309s Round Tube
  • 309s Round Tube
  • ASTM A213 Stainless Steel 309s Round Tube Size: 6.35 mm OD To 152 mm OD




ASTM A213 TP309s Stainless Steel Square Tube supplier

We are Manufacturers & supplier of Stainless Steel 309s Square Tube in India. Looking for trusted dealer & distributor for Stainless Steel 309s Square Tube in India? Information for those interested in buying ASTM A213 Stainless Steel 309s Square Tube. India’s Largest stockholder of SS 309s Square Tube, A213 UNS S30908 Square Tube offer best price in India.

    ASTM A213 Stainless Steel 309s Square Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Square Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Square Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Square Tube Manufacturer
  • ASTM A213 SS 309s Square Tube distributor in India
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Square Tube
  • Stainless Steel 309s Square Tube
  • SS 309s Square Tube
  • 309s Square Tube
  • ASTM A213 Stainless Steel 309s Square Tube Size: 6.35 mm OD To 152 mm OD




ASTM A213 TP309s Stainless Steel Coiled Tube supplier

AISI 309s Stainless Steel Coiled Tube, ASTM A213 309s Coiled Tube, A213 SS 309s Coiled Tube, A213 UNS S30908 Coiled Tube supplier, Check our Best price before you buy

    ASTM A213 Stainless Steel 309s Coiled Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Coiled Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Coiled Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Coiled Tube Manufacturer
  • ASTM A213 SS 309s Coiled Tube distributor in India
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Coiled Tube
  • Stainless Steel 309s Coiled Tube
  • SS 309s Coiled Tube
  • 309s Coiled Tube
  • ASTM A213 Stainless Steel 309s Coiled Tube Size: 6.35 mm OD To 152 mm OD





ASTM A213 TP309s Stainless Steel Rectangular Tube supplier

We are Manufacturers & Exporter of 309s Stainless Steel Rectangular Tube in India. Looking for trusted dealer & distributor for 309s Stainless Steel Rectangular Tube in India? Information for those interested in buying ASTM A213 Stainless Steel 309s Rectangular Tube. India’s Largest stockholder of 309s SS Rectangular Tube, A213 UNS S30908 Rectangular Tube offer best price in India.

    ASTM A213 Stainless Steel 309s Rectangular Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Rectangular Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Rectangular Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Rectangular Tube Manufacturer
  • ASTM A213 SS 309s Rectangular Tube distributor in India
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Rectangular Tube
  • Stainless Steel 309s Rectangular Tube
  • 309s SS Rectangular Tube
  • ASME SA213 309s Rectangular Tube
  • ASTM A213 Stainless Steel 309s Rectangular Tube Size: 6.35 mm OD To 152 mm OD




ASTM A213 TP309s Stainless Steel Tube bends supplier

AISI 309s Stainless Steel Tube bends, ASTM A213 309s Tube bends, A213 SS 309s Tube bends, A213 UNS S30908 Tube bends supplier

    ASTM A213 Stainless Steel 309s Tube bends Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Tube bends Manufacturer

    ASTM A213 TP309s Stainless Steel Tube bends Manufacturer

  • ASTM A213 309s Tube bends suppliers
  • ASTM A213 Stainless Steel 309s Tube bends Manufacturer
  • ASTM A213 309s Tube bends distributor
  • Stainless Steel ASTM A213 Material suppliers
  • ASME SA213 Stainless Steel 309s Tube bends
  • Stainless Steel 309s Tube bends
  • SS 309s Tube bends
  • 309s Tube bends
  • ASTM A213 Stainless Steel 309s Tube bends Size: 6.35 mm OD To 152 mm OD

Finish: 2B MIll Finish , No.4 finish, BA Finish, 400 Grit Finish, 550 Grit Finish, 600 Grit Finish

Thickness: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 1.6mm, 2.0mm, 2.5mm, 3.0mm



ASTM A213 TP309s Stainless Steel High temperature alloy Tube suppliers

AISI Stainless Steel 309s High Temperature alloy Tube, ASTM A213 309s High temperature alloy Tube, A213 SS 309s High temperature alloy Tube, A213 UNS S30908 High temperature alloy Tube Supplier

ASTM A213 Stainless Steel 309s High temperature alloy Tube Trade Name & Size

    ASTM A213 TP309s Stainless Steel High temperature alloy Tube Manufacturer

    ASTM A213 TP309s Stainless Steel High temperature alloy Tube Manufacturer

  • ASTM A213 309s High temperature alloy Tube suppliers
  • ASTM A213 Stainless Steel 309s High temperature alloy Tube Manufacturer
  • ASTM A213 SS 309s High temperature alloy Tube distributor
  • Stainless Steel ASTM A213 Material suppliers
  • 309s Stainless Steel High temperature alloy Tube
  • Stainless Steel ASTM A213 High temperature alloy Tube
  • 309s SS High temperature alloy Tube
  • 309s High temperature alloy Tube
  • ASTM A213 Stainless Steel 309s High temperature alloy Tube Size: 6.35 mm OD To 152 mm OD




ASTM A213 TP309s Stainless Steel Tubería supplier

AISI 309s Stainless Steel Tubería, ASTM A213 309s Tubería, A213 SS 309s Tubería supplier

ASTM A213 Stainless Steel 309s Tubería Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Tubería Manufacturer

    ASTM A213 TP309s Stainless Steel Tubería Manufacturer

  • ASTM A213 309s Tubería supplier
  • ASTM A213 309s Stainless Steel Tubería Manufacturer
  • ASTM A213 309s Tubería distributor
  • Stainless Steel ASTM A213 Material supplier
  • Stainless Steel 309s Tubería
  • Stainless Steel ASTM A213 Tubería
  • 309s SS Tubería
  • 309s Tubería
  • ASTM A213 Stainless Steel 309s Tubería Size: 6.35 mm OD To 152 mm OD



ASTM A213 TP309s Stainless Steel Tubo supplier

AISI 309s Stainless Steel Tubo, ASTM A213 309s Tubo, A213 SS 309s Tubo supplier

ASTM A213 Stainless Steel 309s Tubo Trade Name & Size

    ASTM A213 TP309s Stainless Steel Tubo Manufacturer

    ASTM A213 TP309s Stainless Steel Tubo Manufacturer

  • ASTM A213 309s Tubo supplier
  • ASTM A213 Stainless Steel 309s Tubo Manufacturer
  • ASTM A213 SS 309s Tubo distributor
  • Stainless Steel ASTM A213 Material supplier
  • ASME SA213 Stainless Steel 309s Tubo
  • Stainless Steel ASTM A213 Tubo
  • 309s SS Tubo
  • 309s Tubo
  • ASTM A213 Stainless Steel 309s Tubo Size: 6.35 mm OD To 152 mm OD

Material: TP201, TP202, XM-19, TP309s, TP309sL, TP309sH, TP309sN, TP309sLN, TP309S, TP309H, TP309Cb, TP309HCb, TP309sS, TP309sH, TP309sCb, TP309sS, TP309sH, TP309sCb, TP309sHCb, TP309sHCbN, TP309sHCbLN, TP309s, TP309sL, TP309sH, TP309sTi, TP309sN, TP309sLN, TP309s, TP309sL, TPLM, TP309sLMN, TP309s, TP309sH, TP309s, TP309sH, TP309sHFG, TP309sLN, TP348, TP348H, XM-15, TP444

Shapes: 309s Round Polished Tube, 309s Square Polished Tube, 309s Rectangular Polished Tube, 309s Special Shapes Polished Tube



ASTM A213 TP309s Stainless Steel Precision Tube supplier

We are Manufacturers & Exporter of Stainless Steel 309s Precision Tube in India. Looking for trusted dealer & distributor for 309s Stainless Steel Precision Tube in India? Information for those interested in buying ASTM A213 Stainless Steel 309s Precision Tube. India’s Largest stockholder of SS 309s Precision Tube, ASTM A213 UNS S30908 Precision tube offer Latest price in India.

    ASTM A213 Stainless Steel 309s Precision Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Precision Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Precision Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Precision Tube Manufacturer
  • ASTM A213 SS 309s Precision Tube distributor in India
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Precision Tube
  • Stainless Steel 309s Precision Tube
  • SS 309s Precision Tube
  • ASME SA213 309s Precision Tube
  • ASTM A213 Stainless Steel 309s Precision Tube Size: 6.35 mm OD To 152 mm OD

Standard:  ASTM A213 /ASME SA 213, ASTM A269/ASME SA269 , A312,  A511, A789, A790, A376, EN 10216-5, EN 10297,DIN 17456, DIN 17458, GOST 9941, GOST 9940,  JIS G3446 JIS G3447 JISG3448 JIS G3459 JIS G3463 JIS G 3468


ASTM A213 TP309s Stainless Steel Capillary Tube supplier

India's Largest Stockholder & Exporter of Stainless Steel 309s Precision Tube in India. Looking for trusted dealer & distributor for 309s Stainless Steel Precision Tube in India? Information for those interested in buying ASTM A213 Stainless Steel 309s Precision Tube. India’s Largest stockholder of SS 309s Precision Tube, ASTM A213 UNS S30908 Capillary tube offer Best price in India.

    ASTM A213 Stainless Steel 309s Capillary Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Capillary Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Capillary Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Capillary Tube Manufacturer
  • ASTM A213 SS 309s Capillary Tube distributor in India
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 309s Stainless Steel Capillary Tube
  • Stainless Steel 309s Capillary Tube
  • 309s SS Capillary Tube
  • ASME SA213 309s Capillary Tube
  • ASTM A213 Stainless Steel 309s Capillary Tube Size: 6.35 mm OD To 152 mm OD

Material: TP309s/309sL/309sH, 309s/309sL, 309s/309sH, 309s/309sL, 309s/309sH, 309S, 309sS,S31803,S32205, S2570,S32760,S32309s, 904L 
08X18H10 03X18H11 08X18H10T 12X18H10T 08X17H14M2 03X17H14M2 10X17H13M2T 20X23H18   
SUS309sTP SUS309sLTP SUS309sHTP SUS309sTP SUS309sLTP SUS309sHTP, SUS309sTP, SUS309sHTP, SUS309sTP, SUS309sHTP, SUS309sSTP SUS309sTP, SUS890LTP,  
EN1.4301, 1.4306, 1.4948, 1.4401, 1.4404, 1.4571, 1.4541, 1.4833, 1.4878, 1.4550, 1.4462, 1.4438, 1.4845.

 


ASTM A213 TP309s Stainless Steel Hot finished Tube supplier

Looking for trusted dealer & distributor for 309s Stainless Steel Hot finished Tube in India? Information for those interested in buying ASTM A213 Stainless Steel 309s Hot finished Tube. India’s Largest stockholder of 309s SS Hot finished Tube, ASTM A213 UNS S30908 Capillary tube offer Updated price in India.

    ASTM A213 Stainless Steel 309s Hot finished Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Hot finished Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Hot finished Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Hot finished Tube Manufacturer
  • ASTM A213 SS 309s Hot finished Tube distributor
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Hot finished Tube
  • Stainless Steel 309s Hot finished Tube
  • 309s SS Hot finished Tube
  • ASME SA213 309s Hot finished Tube
  • ASTM A213 Stainless Steel 309s Hot finished Tube Size: 6.35 mm OD To 152 mm OD

Nominal Dia: 1/2 "to 32" NB for Tube
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS 
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)

 


ASTM A213 TP309s Stainless Steel Heat Exchanger Tube supplier

AISI 309s Stainless Stee Heat Exchanger Tube, ASTM A213 309s Heat Exchanger Tube, A213 SS 309s Heat Exchanger Tube, ASTM A213 UNS S30908 Heat Exchanger Tube supplier at Best Price

    ASTM A213 Stainless Steel 309s Heat Exchanger Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Heat Exchanger Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Heat Exchanger Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Heat Exchanger Tube Manufacturer
  • ASTM A213 SS 309s Heat Exchanger Tube distributor
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Heat Exchanger Tube
  • Stainless Steel 309s Heat Exchanger Tube
  • 309s SS Heat Exchanger Tube
  • ASME SA213 Heat Exchanger Tube
  • ASTM A213 Stainless Steel 309s Heat Exchanger Tube Size: 6.35 mm OD To 152 mm OD


Nominal Dia: 1/2 "to 32" NB for Tube
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS 
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)

 


ASTM A213 TP309s Stainless Steel Finned Tube supplier

At SP Metal We Are Maintaining Huge Stock Of ASTM A213 Stainless Steel 309s Finned Tube, Check Our Latest Price List Of ASTM A213 Stainless Steel 309s Finned Tube. We Are Offering ASTM A213 Stainless Steel 309s Finned Tube, ASTM A213 UNS S30908 Finned Tube Very Reasonable Price

    ASTM A213 Stainless Steel 309s Finned Tube Trade Name & Size:

    ASTM A213 TP309s Stainless Steel Finned Tube Manufacturer

    ASTM A213 TP309s Stainless Steel Finned Tube Manufacturer

  • ASTM A213 Stainless Steel 309s Finned Tube Manufacturer
  • ASTM A213 SS 309s Finned Tube distributor
  • Stainless Steel ASTM A213 Material suppliers
  • SA213 Stainless Steel 309s Finned Tube
  • Stainless Steel 309s Finned Tube
  • 309s SS Finned Tube
  • ASME SA213 309s Finned Tube
  • ASTM A213 Stainless Steel 309s Finned Tube Size: 6.35 mm OD To 152 mm OD

Test: Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector

Process: 
Cold drawn, Cold rolled, Precision Rolled for Tube

Equipment: Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc

Stainless Steel Tube Origin: West Europe / Japanese / Indian / USA / Korean / American / European

Test Certificates for Stainless Steel Tube: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report



309s Stainless Steel Tube Systems

309s Stainless steel tube is typically specified as OD (outside diameter) and WT (wall thickness) and mechanical properties of the base stainless steel material. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength.

Tube is manufactured in round, square and rectangular sections in a variety of wall thicknesses. It is usually manufactured by the processes of longitudinal welding, hot and cold drawing (seamless) or spiral welding.

Finishes or appearance range from unpolished to highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to mirror appearance. Finishes are selected to suit application and aesthetic appeal.

Stainless steel 309s tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning.

Tube is usually annealed if extensive forming and bending is required, such as for bending or expanding. The tubular products system incorporates a comprehensive range of stainless steel fittings in the form of elbows, tees, reducers and flanges in various sizes, wall thickness, grades and finishes to suit tube dimensions and tolerances.


As-welded (AW) tube

Decorative and Structural tube

This tubing is produced direct off the continuous tube welding mill, using cold rolled stainless steel strip made to ASTM standards, with tube produced to commercial limits of straightness in standard or specific customer lengths. AW tube has a higher yield point than annealed tube and is generally used for decorative applications or in mildly corrosive conditions. It is not suitable for applications requiring significant flaring, expanding or bending.

Manufacturing specification: ASTM A554.

 

Food quality tube

This tube at the point of manufacture goes through a process where the internal weld bead is rolled. The result is an improved internal finish along the weld, reducing the chance of a crevice where liquid or food product may be trapped. This assists with 'clean in place' (CIP) environment food and beverage process lines or other applications such as the pharmaceutical industry.

Manufacturing specification: ASTM 1528.

 

As-welded annealed (AWA) tube

This tube is produced by the same process as AW tube but is annealed to relieve stresses and improve ductility. Bright annealing is carried out in a controlled-atmosphere furnace, so that no oxide or scale is formed on the surface.

Annealing both increases the corrosion resistance and softens the tube which allows severe manipulation such as bending, expanding and forming.

Manufacturing specification: ASTM A269.

 

Cold worked annealed (CWA) tube

This tube is typically destined for heat exchanger applications and is produced in a similar way to AWA product except that the internal bead is rolled flush with the inside tube surface prior to annealing.

Manufacturing specification: ASTM A249M.

 

Cold drawn welded (CDW) and cold drawn welded annealed (CDWA) tube

 

The tube is produced by drawing through a hardened steel or tungsten carbide die, at room temperature. The purpose of cold drawing is to reduce the OD or wall or both, to produce a smooth surface finish and to break up the weld structure, which results in recrystallisation when annealed.

Through cold drawing tube in the AW and AWA conditions, fine dimensional tolerances are achieved, with excellent uniformity of wall thickness and concentricity, grain structure and hardness.

Manufacturing specification: ASTM A249M.

 

Cold drawn seamless (CDS) tube

This tube is produced by drawing from hollow billets. It is usually supplied in the annealed and pickled condition and used where service conditions involve high pressure and corrosive conditions and where good surface finish and close tolerances are required, e.g. heat exchanger and condenser tubing, instrumentation tubing and some refinery applications.

Manufacturing specification: ASTM A269 for general service ASTM A213M for heat exchanger service.

 

Spiral welded tube

This tube is produced by the helical forming and automatic welding of a continuous strip of stainless steel.

Typical applications include water and pulp in paper mills, product and effluent lines in chemical processing, water lines for brewing, dust fume extraction, furnace and boiler flues, stormwater down-Tube in high-rise applications and ventilation ducts and condensation lines for air conditioning.

Manufacturing specification: generally to ASTM A778, except for mechanical properties.


Available Types of ASTM A213 TP309s Stainless Steel Tube at best Price



Dealer, Distributors, & Supplier of World's Top 10 Manufacturer of ASTM A213 TP309s Stainless Steel Tube

Nippon Steel 309s Stainless Steel Tube

Nippon Steel 309s Stainless Steel Tube

Sandvik 309s Stainless Steel Tube

Sandvik 309s Stainless Steel Tube

Sanyo Special Steel 309s Stainless Steel Tube

Sanyo Special Steel 309s Stainless Steel Tube

Kobe Steel 309s Stainless Steel Tube

Kobe Steel 309s Stainless Steel Tube

Schoeller Bleckmann 309s Stainless Steel Tube

Schoeller Bleckmann 309s Stainless Steel Tube

Salzgitter Mannesmann 309s Stainless Steel Tube

Salzgitter Mannesmann 309s Stainless Steel Tube

Tubacex Steel 309s Stainless Steel Tube

Tubacex Steel 309s Stainless Steel Tube



Manufacturing 309s Stainless Steel Tube

There are three main methods of manufacturing tubing that lend their names to tubing classifications. 

Seamless
SS 309s Tube are produced through extrusion. 309s Extruded tubes can be formed in a hot or cold process. Long sections of steel bar are forced through a die that blocks out the intended shape of the tube.

As-welded or electric resistant welded (ERW)

This method involves passing a rolled sheet of steel through two weld rollers. The weld rollers have a groove around their circumference, through which the steel roll passes. There is a contact at the roll seam that transmits electricity at a high enough current to weld the seam closed. The resulting weld is very small.

Drawn-over-mandrel (DOM)

A mandrel is a small piece of metal inserted into the tube to define a shape. It gives the tube extra support to prevent unwanted wrinkling during drawing. The tube is passed through a die that has a smaller diameter than the current tube size. As the tube is drawn, it shrinks to match the size of the die’s diameter. This process allows for tight tolerances and specifications. 

Each of these manufacturing processes allows manufacturers the ability to form varying tube shapes and sizes. Tubes are not always cylindrical, and can be made in triangle, square or other polygonal shapes. Steel tubes destined for certain applications require extra processes as well. Applications involving hydrogen must be factory pre-cleaned or certified as instrument grade due to hydrogen’s reactive characteristics that can cause metal embrittlement or even explosions. 

Generally, a steel tube manufacturing process is chosen for its interaction with the type of steel to be used. Certain types of steel react poorly to heat because of carbon content, so they can’t be easily welded. Steel types also play a role in decisions regarding use in volatile applications.


Types of ASTM for Stainless Steel 309s Tube

ASTM A213 : Seamless and straight-seam welded austenitic Tube intended for high temperature and general corrosive service. Filler metal not permitted during welding.

ASTM A358 : Electric fusion welded austenitic Tube for corrosive and/or high temperature service. Typically only Tube up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.

ASTM A790 : Seamless and straight-seam welded ferritic/austenitic (duplex) Tube intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.

ASTM A409 : Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall Tube in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high

ASTM A376 : Seamless austenitic Tube for high temperature applications.

ASTM A813 : Single-seam, single- or double- welded austenitic Tube for high temperature and general corrosive applications.

ASTM A814 : Cold-worked welded austenitic Tube for high temperature and general corrosive service.


(A) ASTM / ASME - Standards
ASTM / ASME A213 / SA 213 Seamless ferritic and austenitic alloy steel boiler, super heater and heat Exchanger Tubes
ASTM / ASME A249 / SA 249 Welded austenitic steel boiler, Super Heater, Heat Exchanger Tubes and Condenser Tubes
ASTM / ASME A268 / SA 268 Seamless and Welded ferritic and martensitic stainless steel tubing for general service
ASTM / ASME A269 / SA 269 Seamless and Welded austenitic  stainless steel tubing   for general service
ASTM / ASME A312 / SA 312 Austenitic stainless steel seamless Tube & S.S. Welded Tube
ASTM / ASME A358 / SA 358 Stainless Steel Tube for high temperature service
ASTM / ASME A688 / SA 688   Welded feed water heater and Tubes
(C) German - Standards
DIN   17455 Welded general purpose piping
DIN   17456 Seamless circular austenitic stainless steel for general service
DIN   17457 Circular austenitic stainless steel welded tubes subject to special requirement
DIN   17458 Seamless circular austenitic stainless steel tubes subject to special requirement
DIN   28180 Stainless Steel Seamless Heat Exchanger Tube
(D) NF - Standards (AFNOR Standard)
NF   A49-117 Seamless ferritic and austenitic stainless steel tubes for general services
NF   A49-217 Seamless ferritic, austenitic and ferritc-austenitic stainless steel tubes for heat exchanger
(F) JIS - Standards
JIS G3459 S.S. Seamless Tube.
JIS G3463 Stainless steel boiler and heat exchanger tubes


ASTM A213 TP309s Stainless Steel Tube Available Size

Tube Tube Type NB Sizes Sch 5 Sch 10 Sch 40 Sch 80 Sch 160
ASTM A213 TP309s Stainless Steel Tube
1/8″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
1/4″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
3/8″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
1/2″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
3/4″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
1″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
1 1/4″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
1 1/2″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
2″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
2 1/2″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
3″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
4″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
5″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size
ASTM A213 TP309s Stainless Steel Tube
6″
available pipe tube size
available pipe tube size
available pipe tube size
available pipe tube size


ASTM A213 TP309s Stainless steel Tube grade names

EN-standard
Steel no. k.h.s DIN
EN-standard
Steel name
SAE grade UNS
1.4109 X65CrMo14 440A S44002
1.4112 X90CrMoV18 440B S44003
1.4125 X105CrMo17 440C S44004
440F S44020
1.4016 X6Cr17 430 S43000
1.4408 G-X 6 CrNiMo 18-10 316 S31600
1.4512 X6CrTi12 409 S40900
410 S41000
1.4310 X10CrNi18-8 301 S30100
1.4318 X2CrNiN18-7 301LN
1.4307 X2CrNi18-9 317LL S317L3
1.4306 X2CrNi19-11 317LL S317L03
1.4311 X2CrNiN18-10 317LLN S317L53
1.4301 X5CrNi18-10 317L S317L00
1.4948 X6CrNi18-11 317LH S317L09
1.4303 X5CrNi18-12 305 S30500
X5CrNi30-9 312
1.4841 X22CrNi2520 310 S31000
1.4845 X 5 CrNi 2520 310S S31008
1.4541 X6CrNiTi18-10 321 S32100
1.4878 X12CrNiTi18-9 321H S32109
1.4404 X2CrNiMo17-12-2 316L S31603
1.4401 X5CrNiMo17-12-2 316 S31600
1.4406 X2CrNiMoN17-12-2 316LN S31653
1.4432 X2CrNiMo17-12-3 316L S31603
1.4435 X2CrNiMo18-14-3 316L S31603
1.4436 X3CrNiMo17-13-3 316 S31600
1.4571 X6CrNiMoTi17-12-2 316Ti S31635
1.4429 X2CrNiMoN17-13-3 316LN S31653
1.4438 X2CrNiMo18-15-4 317L S31703
1.4362 X2CrNi23-4 2317L S32317L
1.4462 X2CrNiMoN22-5-3 2205 S31803/S32205
1.4501 X2CrNiMoCuWN25-7-4 J405 S32760
1.4539 X1NiCrMoCu25-20-5 904L N08904
1.4529 X1NiCrMoCuN25-20-7 N08926
1.4547 X1CrNiMoCuN20-18-7 254SMO S31254 


ASTM A213 TP309s Stainless Steel Tube Equivalent Grades :

STANDARD 309S 309H
UNS S30908 S30909
WERKSTOFF NR. 1.4833 1.4833

 

STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN
SS 309s 1.4833 S30908 - - - - -


ASTM A213 TP309s Stainless Steel Tube Chemical Composition :

ELEMENT SS 309S SS 309H
NI 12.00 – 15.00 12.00 – 15.00
CR 22.00 – 24.00 22.00 – 24.00
FE 62.095 min 62.885 min
C 0.08 max 0.04 – 0.10 max
MN 2.00 max 2.00 max
P 0.045 max 0.045 max
S 0.030 max 0.030 max
SI 1.00 max 1.00 max
MO 0.75 max -


ASTM A213 TP309s Stainless Steel Tube Mechanical Properties :

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
309s 515 205 40 95 217


ASTM A213 TP309s Stainless Steel Tube Physical Properties

DENSITY (G/CM 3) 8.0
DENSITY (LB/IN 3) 0.289
MELTING POINT (°C) 1455
MELTING POINT (°F) 2650



ASTM A213 TP309s Stainless Steel Tube Price List



Dimensions of ASTM A213 TP309s Stainless Steel Tube

Outside
Diameter
Qty/B 0.6 0.7 0.8 0.9 1.0 1.2 1.5 2.0 3.0 4.0 5.0 6.0
Inches mm Lgh Kgs Kgs Kgs Kgs Kgs Kgs Kgs Kgs Kgs Kgs Kgs Kgs
3/8" 9.5 100 0.81 0.94 1.06 1.18 1.29 1.51 1.82          
1/2" 12.7 100 1.10 1.28 1.45 1.61 1.78 2.10 2.55          
5/8" 15.9 100 1.39 1.62 1.84 2.05 2.26 2.68 3.28          
3/4" 19.1 100 1.69 1.96 2.22 2.49 2.75 3.26 4.01          
7/8" 22.2 100 1.97 2.29 2.60 2.91 3.22 3.83 4.72          
1" 25.4 100 2.26 2.63 2.99 3.35 3.71 4.41 5.45          
11/8" 28.6 50 2.55 2.97 3.38 3.79 4.19 5.00 6.18          
11/4" 31.8 50 2.84 3.31 3.77 4.23 4.68 5.58 6.91          
11/2" 38.1 50 3.42 3.98 4.53 5.09 5.64 6.73 8.34          
15/8" 41.3 50 3.71 4.32 4.92 5.52 6.12 7.31 9.07          
13/4" 44.5 50 4.00 4.66 5.31 5.96 6.61 7.90 9.80          
2" 50.8 10     6.08 6.82 7.57 9.04 11.24 14.83 21.79      
21/2" 63.5 10     7.62 8.56 9.50 11.36 14.13 18.69 27.58      
3" 76.2 10     9.17 10.30 11.43 13.68 17.03 22.55 33.37 43.88    
31/2" 88.9 10     10.71 12.03 13.36 15.99 19.92 26.41 39.16 51.60    
4" 101.6 10           18.31 22.82 30.27 44.95 59.32 73.39 87.16
5" 127 10                        

Dealer & Distributor of ASTM A213 TP309s Stainless Steel Tube supplier, 2% discount on Stainless Steel 309s Tube supplier bulk order

ASTM A213 TP309s Stainless Steel Tube supplier

ASTM A213 TP309s Stainless Steel Tube supplier

Close relationships with all of the top mill producing stainless steel 309s Tube give us greater control over delivery schedules and custom orders. Our large stocking distribution sites in Kalamboli- Navi Mumbai & Ahmedabad help expedite shipping of Stainless Steel 309s Tube supplier all over the world. Add that to our decades of experience supplying SS 309s Tube supplier to highly technical, demanding industries, and you can rest assured your project will be done right.

Origin: West Europe / Japan / Indian / USA / Korean

 



 

309s Stainless Steel Tube supplier
Sr. No.
Material
Size
Sch.
Specification
1
Seamless Tube
15 NB
To
300 NB
Sch. 5s
Sch. 10s
Sch. 40s
Sch. 80s
Sch. 160s
Sch. XXS
ASTM A213
2
Welded (ERW) Tube
15 NB
To
300 NB
Sch. 5s
Sch. 10
Sch. 40s &
Sch. 80s
ASTM A213
3
Welded (ERW) Tube
150 NB
To
600 NB
Sch. 5s
Sch. 10s
Sch. 40s &
Sch. 80s
ASTM A358



ASTM A213 TP309s Stainless steel Tube nominal bore sizes

  • 1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3/4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1-1/4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 2-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 5" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 6" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 8" NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 10" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 12" NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 14" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 16" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 18" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS

ASTM A213 TP309s Stainless Steel Tube Harmonized System Codes (HS Code)

7309s10 Line Tube of a kind used for oil or gas Tubelines: Of iron or nonalloy steel:
7309s20 Casing, tubing and drill Tube, of a kind used in drilling for oil or gas: Casing:
7309s31 Tubes, Tubes and Hollow Profiles, of Iron or Non-alloy Steel, Cold-drawn or cold-rolled (cold-reduced)
7309s39 Other Tubes, Tubes and Hollow Profiles, of Iron or Non-alloy Steel
7309s41 Tubes, Tubes and Hollow Profiles, of stainless steel , Cold-drawn or cold-rolled (cold reduced)
7309s49 Other Tubes, Tubes and Hollow Profiles, of Stainless Steel, Seamless
7309s51 Tubes, Tubes and Hollow Profiles, of Other Alloy Steel, Cold-drawn or cold-rolled (cold reduced)
7309s59 Other Tubes, Tubes and Hollow Profiles, of Other Alloy Steel,
7309s90 Other Tubes, Tubes and Hollow Profiles, Seamless, of Iron or Steel


ASTM A213 TP309s Stainless Steel Tube Available Surface Finish

Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.
End Finishes: Beveled, Square Cut, Threaded & Coupled.


ASTM A213 TP309s Stainless Steel Tube Outside Diameter & Tolerance

Nominal
Tube
Size
(inches)
Outside
Diameter
Schedule
5S 10S 40S 80S
(mm) (inches) Wall Thickness and Weight
mm
(in)
kg/m mm
(in)
kg/m mm
(in)
kg/m mm
(in)
kg/m
1/8 10.3 0.405 - - 1.25
(0.049)
0.28 1.73
(0.068)
0.37 2.42
(0.095)
0.47
1/4 13.7 0.540 - - 1.66
(0.065)
0.49 2.24
(0.088)
0.63 3.03
(0.119)
0.80
3/8 17.2 0.675 - - 1.66
(0.065)
0.63 2.32
(0.091)
0.85 3.20
(0.126)
1.10
1/2 21.3 0.840 1.65
(0.065)
0.81 2.11
(0.083)
1.00 2.77
(0.109)
1.27 3.74
(0.147)
1.62
3/4 26.7 1.050 1.65
(0.065)
1.02 2.11
(0.083)
1.28 2.87
(0.113)
1.68 3.92
(0.154)
2.20
1 33.4 1.315 1.65
(0.065)
1.30 2.77
(0.109)
2.09 3.38
(0.133)
2.50 4.55
(0.179)
3.24
1 1/4 42.2 1.660 1.65
(0.065)
1.66 2.77
(0.109)
2.69 3.56
(0.140)
3.39 4.86
(0.191)
4.47
1 1/2 48.3 1.900 1.65
(0.065)
1.91 2.77
(0.109)
3.11 3.69
(0.145)
4.06 5.08
(0.200)
5.41
2 60.3 2.375 1.65
(0.065)
2.40 2.77
(0.109)
3.93 3.92
(0.154)
5.45 5.54
(0.218)
7.49
2 1/2 73.0 2.875 2.11
(0.083)
3.69 3.05
(0.120)
5.26 5.16
(0.203)
8.64 7.01
(0.276)
11.4
3 88.9 3.500 2.11
(0.083)
4.52 3.05
(0.120)
6.46 5.49
(0.216)
11.3 7.62
(0.300)
15.3
3 1/2 101.6 4.000 2.11
(0.083)
5.18 3.05
(0.120)
7.41 5.74
(0.226)
13.6 8.08
(0.318)
18.6
4 114.3 4.500 2.11
(0.083)
5.84 3.05
(0.120)
8.37 6.02
(0.237)
16.1 8.56
(0.337)
22.3
5 141.3 5.563 2.77
(0.109)
9.46 3.41
(0.134)
11.6 6.56
(0.258)
21.8 9.53
(0.375)
31.0
6 168.3 6.625 2.77
(0.109)
11.3 3.41
(0.134)
13.9 7.12
(0.280)
28.3 10.98
(0.432)
42.6
8 219.1 8.625 2.77
(0.109)
14.8 3.76
(0.148)
20.0 8.18
(0.322)
42.5 12.70
(0.500)
64.6
10 273.1 10.750 3.41
(0.134)
22.7 4.20
(0.165)
27.8 9.28
(0.365)
60.4 12.70
(0.500)
81.5
12 323.9 12.750 3.97
(0.156)
31.3 4.58
(0.180)
36.1 9.53
(0.375)
73.9 12.70
(0.500)
97.4

Other Grades of ASTM A213 Stainless Steel Tube



ASTM A213 TP309s Stainless Steel Tube Value Added Options

ASTM A213 TP309s Stainless Steel Tube Value Added Options

Stainless Steel Tube Polishing

SP Metal can polish nearly any stainless steel 309s Tube item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel 309s polished Tubes can also be cut to size.

Stainless Steel Tube Beveling

SP Metal can bevel stainless steel 309s Tube to prepare for welding or other processes.

Stainless Steel Tube Honing/Turning

SP Metal can hone Tube and tube, using a precision abrasion process in order to obtain a desired finish or close dimensional tolerance.

Heatreating & Annealing

Some grades of stainless steel 309s Tube can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 309s stainless steel plate can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application

Positive Material Identification (PMI)

SP Metal can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications.

SS Tube UT Testing

In some cases, UT testing of the stainless steel 309s Tube and tueb may be required. We can assist you with this requirement.

Other Materials Testing :

NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.



Ready Stock Available : Top 10 Manufacturers of ASTM A213 TP309s Stainless Steel Tube

ASTM A213 TP309s Stainless Steel Tube
  •  stainless steel coil tubing
  •  A213 TP309s stainless steel tube coil
  •  A213 TP309s stainless steel Tube coil
  •  A213 TP309s stainless steel Tube
  •  SS 309s Tube
  •  309s SS Tube
  •  large diameter steel Tube Manufacturer in India
  •  large diameter 309s stainless steel Tube
  •  large 309s stainless steel Tube
  •  jindal steel Tubes
  •  stainless steel 309s Tube price
  •  price of stainless steel Tube
  •  4 inch steel Tube price
  •  2 steel Tube price
  •  ss steel Tube price
  •  4 inch 309s stainless steel Tube price
  •  stainless steel 309s Tube price per foot
  •  SS 309s Tube price
  •  SS 309s Tube
  •  SS 309s Tubes
  •  SS 309s Tubes Manufacturer in India
  •  3 inch stainless steel 309s Tube
  •  8 inch stainless steel 309s Tube
  •  1 inch 309s stainless steel Tube
  •  A213 TP309s stainless steel Tube 2 inch
  •  3 inch steel Tube
  •  A213 TP309s stainless steel 2 inch Tube
  •  2.5 inch stainless steel 309s Tube
  •  12 inch stainless steel 309s Tube
  •  steel Tube 2 inch
  •  stainless steel 309s Tube Manufacturers in India
  •  steel Tube Manufacturers in India
  •  A213 TP309s stainless Tube Manufacturer in India
  •  SS 309s Tube supplier
  •  steel Tube supplier
  •  NB Size Stainless Steel 309s Tubes
  •  Duplex Stainless Steel Tubes
  •  A213 TP309s schedule 5s stainless steel Tube
  •  ERW Stainless Steel 309s Tube
  •  Fabricated Stainless Steel 309s Tube
  •  CDW Stainless Steel 309s Tube
  •  Stainless Steel 309s Cold Drawn Seamless Tube
  •  schedule 10 stainless steel 309s Tube
  •  2 inch stainless steel 309s Tube
  •  2 inch steel Tube
  •  stainless steel 309s Tube
  •  stainless steel Tube 309s
  •  A213 TP309s stainless Tube
  •  Tube ss 309s
  •  ss 309s seamless Tube
  •  stainless steel Tube grade 309s
  •  A213 TP309s Tube
  •  schedule 80 steel Tube
  •  A213 TP309s stainless steel round Tube
  •  A213 TP309s stainless steel tube Tube
  •  A213 TP309s stainless steel Tube
  •  stainless steel 309s Tube schedule 40
  •  stainless steel 309s Tube schedule 10
  •  stainless steel 309s schedule 10 Tube
  •  Tube stainless steel 309s schedule
  •  schedule 10 stainless steel
  •  Tube schedule stainless steel
  •  schedule 10s stainless steel Tube
  •  schedule 40s stainless steel Tube
  •  A213 TP309s stainless steel schedule Tube
  •  A213 TP309s stainless steel Tube schedule 80
  •  schedule 10 stainless Tube
  •  A213 TP309s stainless steel schedule 80 Tube
  •  schedule 5s 309s stainless steel Tube
  •  schedule 40 309s stainless steel Tube
  •  schedule 10 309s stainless steel Tube
  •  schedule 20 stainless steel Tube
  •  309s stainless steel Tube schedule 40
  •  A213 TP309s stainless steel Tube schedule 160
  •  A213 TP309s stainless Tube
  •  A213 TP309s stainless steel Tube supplier
  •  1.5 stainless steel 309s Tube
  •  1.5 inch stainless steel 309s Tube
  •  1.5 steel Tube
  •  Stainless Tube supplier
  •  A213 TP309s schedule 10 stainless steel Tube
  •  A213 TP309s schedule 40 stainless steel Tube
  •  Stainless Steel 309s Heat Exchanger Tube
  •  stainless steel 309s Tube supplier
  •  stainless steel 309s Tube supplier
  •  schedule 40 stainless steel 309s Tube
  •  A213 TP309s stainless seamless Tube
  •  A213 TP309s stainless steel seamless
  •  seamless stainless steel 309s Tube Manufacturer in India
  •  stainless steel 309s Tube seamless
  •  stainless steel 309s seamless Tube supplier
  •  seamless Tube stainless steel grade 309s
  •  seamless steel Tube
  •  seamless Tube Manufacturer in India
  •  Tube seamless Suppliers
  •  powder-coated Tubes
  •   Hot Finish Stainless Steel 309s Seamless
  •   Cold Drawn Seamless
  •   Suitable To Hone
  •   SS 309s seamless Tube
  •  SS 309s Tubes supplier
  •  schedule 40 SS 309s Tube
  •  SS 309s Tube supplier
  •  seamless SS 309s Tube
  •  seamless stainless steel 309sTube
  •  stainless steel 309sseamless Tube
  •  seamless stainless Tube
  •  Stainless Steel 309s Welded Tube
  •  Stainless steel Tube coil
  •  schedule 40 ss Tube
  •  seamless ss Tube Manufacturer in India
  •  24" Stainless Steel 309s Tube
  •  36" Stainless Steel 309s Tubes
  •  20" Stainless Steel 309s Tubes
  •  Stainless Steel 309s High Pressure Steel Tube
  •  Stainless Steel Seamless Tubes
  •  Fabricated Stainless Steel 309s Tubes
  •  Stainless Steel Welded Tubes
  •  Stainless Steel 309s U Bend
  •  ASTM A691 309s Welded Tube/ EFW Tube
  •  ASTM A691 309s Welded Round Hot Rolled Electric Weld
  •  Stainless Steel 309s High Pressure Steel Tube
  •  Stainless Steel 309s Polished Tubes
  •  galvanised Tube
  •  schedule 5 stainless steel 309s Tube
  •  schedule 160 stainless steel 309s Tube
  •  stainless Tube schedule
  •  schedule 80 stainless steel 309s Tube
  •  stainless steel 309s schedule 40 Tube




Stainless Steel 309s Tube Applications

Stainless steel™s resistance to corrosion and staining, low maintenance, relatively low cost, and familiar lustre make it an ideal material for many applications. There are over 150 grades of stainless steel, of which fifteen are most commonly used. The alloy is milled into coils, sheets, plates, bars, wire, and tubing to be used in cookware, cutlery, hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries) and as an automotive and aerospace structural alloy and construction material in large buildings. Storage tanks and tankers used to transport orange juice and other food are often made of stainless steel, due to its corrosion resistance and antibacterial properties. This also influences its use in commercial kitchens and food processing plants, as it can be steam-cleaned and sterilized and does not need paint or other surface finishes.

Stainless steel is used for jewellery and watches with 309s being the type commonly used for such applications. It can be re-finished by any jeweler and will not oxidize or turn black.

Some firearms incorporate stainless steel components as an alternative to blued or parkerized steel. Some handgun models, such as the Smith & Wesson Model 60 and the Colt M1911 pistol, can be made entirely from stainless steel. This gives a high-luster finish similar in appearance to nickel plating. Unlike plating, the finish is not subject to flaking, peeling, wear-off due to rubbing (as when repeatedly removed from a holster), or rust when scratched. Some automotive manufacturers use stainless steel as decorative highlights in their vehicles.


Stainless Steel 309s Tube Recycling and reuse

Stainless steel is 100% recyclable. An average stainless steel object is composed of about 60% recycled material of which approximately 40% originates from end-of-life products and about 60% comes from manufacturing processes.

There is a secondary market that recycles usable scrap for many stainless steel markets. The product is mostly coil, sheet and blanks. This material is purchased at a less-than-prime price and sold to commercial quality stampers and sheet metal houses. The material may have scratches, pits and dents but is made to the current specifications.



Stainless Steel 309s Tube dimension ANSI B 36.10



Our Overseas Sales Distributors

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Colombo

Countries We Deliver To: India , United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

India's Largest Inventory of Stainless Steel Tube


We export


manufacturer of ASTM A213 TP309s Stainless Steel Tube in india, Supplier of 309s Stainless Steel Tube in India, Exporter of 309s Stainless Steel Tube in India, Distributor of 309s Stainless Steel Tube in India, Trader of 309s Stainless Steel Tube in India, Stockist of 309s Stainless Steel Tube in India, Stockholder of 309s Stainless Steel Tube in India, ASTM A213 TP309s Stainless Steel Tube Manufacturers in India, ANSI B 36.10 Stainless Steel GR. 309s Round, Square, Rectangular, Hydraulic Tubes Suppliers, A213 TP309s Stainless Steel Tube distributor, specialize in ASTM A213 TP309s Stainless Steel Tube, ASTM A213 TP309s Stainless Steel Tube with Mill & Test Certificate, wide range of ASTM A213 TP309s Stainless Steel Tube, ASTM A213 TP309s Stainless Steel Tube Exporter in India, UNS S30908 Tubes, ASTM A213 TP309s Stainless Steel Tube manufacturer in Mumbai,Maharashtra, ASTM A213 TP309s Stainless Steel Tube manufacturers in rajkot,Gujarat

Sidebar Menu